DEFORMATION CHARACTERISTICS ABOUT AGGREGATION OF RUBBER SPHERE IN TRIAXIAL COMPRESSION TEST

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Strength and Deformation Characteristics of Granular Materials under Extremely Low to High Confining Pressures in Triaxial Compression

— The shearing strength and volumetric relationship of granular materials change notably with a variation of confining pressure. In this study the effect confining pressure on the mechanical behavior of granular materials were observed using discrete element method (DEM). The triaxial tests were conducted on seven specimens covering a range from extremely low to high confining pressures. Each i...

متن کامل

Numerical Study of Deformation Characteristics in Plane Strain Compression Test (psct) Volume Certified following Microstructure

The deformation mode during hot rolling of plates and strips is very similar to ideal plane strain conditions. For this reason it is highly desirable to obtain this deformation mode during laboratory experiments. That’s why the PSC testing is now generally accepted as one of the most reliable methods for the generation of flow stress data and microstructural investigation of flat rolling. Inter...

متن کامل

EVALUATING HOT DEFORMATION BEHAVIOR OF W360 TOOL STEEL BY HOT COMPRESSION TEST

In this research, the hot deformation behavior of W360 tool steel was investigated using hot compression test at 1000-1200°C and strain rates of 0.001, 0.01, 0.1, and 1 s-1. According to the results, dynamic recrystallization was found the most important restoration factor of this alloy during hot deformation. Recrystallization was enhanced with an increase in temperature and strain rate. Also,...

متن کامل

Nonlinear Large Deformation Analysis of Rubber Bumpers in Automotive Suspensions

In this article, rubber bumpers of Double - Wishbone suspension system have been modeled and analyzed. The objective of the present work is to predict the performance of these products during deformation, represent an optimum method to design, obtain stiffness characteristic curves and utilize the results in the automotive suspension dynamic analysis. These parts are nonlinear and exhibit large...

متن کامل

Rubber rolling over a sphere

“Rubber” coated rolling bodies satisfy a no-twist in addition to the no slip satisfied by “marble” coated bodies [28]. Rubber rolling has an interesting differential geometric appeal because the geodesic curvatures of the curves on the surfaces at the corresponding points are equal. The associated distribution in the 5 dimensional configuration space has 2-3-5 growth (these distributions were f...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Jioshinsetikkusu Rombunshu (Geosynthetics Engineering Journal)

سال: 2008

ISSN: 1344-6193,1883-146X

DOI: 10.5030/jcigsjournal.23.89