Deformation Behavior of Powder Metallurgy Connecting Rod Preform During Hot Forging Based on Hot Compression and Finite Element Method Simulation
نویسندگان
چکیده
منابع مشابه
Preform Shape Optimization of Connecting Rod Using Finite Element Method and Taguchi Method
Preform design in forging processes is an important aspect for improving the forging quality and decreasing the production cost. The objective of this paper is to obtain an optimal perform shape in the consideration of the influence of the metal flow deformation in closed die forging process. Finite element method based DEFORMTM 3D software in conjunction with Taguchi method has been used to si...
متن کاملHot Deformation Behavior and Pulse Current Auxiliary Isothermal Forging of Hot Pressing Sintering TiAl Based Alloys
This paper focuses on the fabrication of as-forged Ti46.5Al2Cr1.8Nb-(W, B) alloy via pulse current auxiliary isothermal forging (PCIF). The starting material composed of near gamma (NG) microstructure was fabricated by adopting pre-alloyed powders via hot pressing sintering (HPS) at 1300 °C. Isothermal compression tests were conducted at a strain rate range of 0.001-0.1 s-1 and a temperature ra...
متن کاملCorrecting the stress-strain curve in hot compression test using finite element analysis and Taguchi method
In the hot compression test friction has a detrimental influence on the flow stress through the process and therefore, correcting the deformation curve for real behavior is very important for both researchers and engineers. In this study, a series of compression tests were simulated using Abaqus software. In this study, it has been employed the Taguchi method to design experiments by the factor...
متن کاملEVALUATING HOT DEFORMATION BEHAVIOR OF W360 TOOL STEEL BY HOT COMPRESSION TEST
In this research, the hot deformation behavior of W360 tool steel was investigated using hot compression test at 1000-1200°C and strain rates of 0.001, 0.01, 0.1, and 1 s-1. According to the results, dynamic recrystallization was found the most important restoration factor of this alloy during hot deformation. Recrystallization was enhanced with an increase in temperature and strain rate. Also,...
متن کاملSimulation Of Phase Transformation In Hot Forging Dies During A Precision Forging Process By Means Of Finite- Element-Analysis
The Finite-Element-Analysis (FEA) is of major importance for the design and improvement of forging processes. In this field, FEA is traditionally used to predict die fill, residual stresses and forming forces. The intention of the work presented in this paper is the development of an advanced simulation model for the description of phase transformation processes in forging dies based on FEA. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metallurgical and Materials Transactions A
سال: 2017
ISSN: 1073-5623,1543-1940
DOI: 10.1007/s11661-017-4062-5