Deformation behavior in tube bending: a comparative study of compression bending and rotary draw bending

Applied on the Rotary Draw Bending Process

effect of mandrel, its clearance and pressure die on tube bending process via rotary draw bending method

one of the most prominent industries is bending, while using rotary draw bending method is known to be the most conventional approach for thin wall tube bending. pressure die is one effective tool which boosts the tube during the process and eventually improves the bending quality. other effective parameters are mandrel and the amount of clearance between tube and mandrel. in the present study,...

Analysis of the Rotary-draw Bending Process for Thin-walled Rectangular Aluminum Tube

The Rotary-Draw Bending (RDB) process is a distinguished process employed for the precision cold bending of a hollow tube with small radius bends using Numerical Control (NC) machines. This research presents an analytical model based on the power law hardening model for the RDB processing of rectangular thin tubes. Based on the constraints of the tube in the dies and its thinness, the plane str...

Effect of Cooling on Bending Angle and Microstructure in Laser Tube Bending with Circumferential Scanning

Laser tube bending is a flexible forming process. Two irradiation methods of axial and circumferential scanning are generally used to form metal tubes. The two most important disadvantages of circumferential scanning are its lower bending angle and the time interval required between each scan for cooling purpose. In this research, a novel cooling strategy during laser tube bending with circumfe...

Experimental and Numerical Investigation on the Heat Treatment Effects of AA6063 Aluminum Alloy Tubes During Rotary Draw Bending

In this study, the effects of heat treatment of aluminum alloy on the tube bending process were investigated in the rotary draw bending process. As two experimental and numerical simulation methods were used to determine the wall-thinning, ovality, and spring back for extruded, annealed, and aged AA6063 aluminum alloy tubes in different bending angles and bend radii. Numerical simulations were ...