Deformation analysis and hole diameter error compensation for hybrid robot based helical milling
نویسندگان
چکیده
منابع مشابه
Compliance error compensation in robotic-based milling
The paper deals with the problem of compliance errors compensation in robotic-based milling. Contrary to previous works that assume that the forces/torques generated by the manufacturing process are constant, the interaction between the milling tool and the workpiece is modeled in details. It takes into account the tool geometry, the number of teeth, the feed rate, the spindle rotation speed an...
متن کاملANFIS+PID Hybrid Controller Design for Controlling of a 6-DOF Robot Manipulator and its Error Convergence Analysis
In this paper, an ANFIS+PID hybrid control policy has been addressed to control a 6-degree-of freedom (6-DOF) robotic manipulator. Then its error convergence has been also evaluated. The ability to formulate and estimate the system uncertainties and disturbances along with system dynamics and rejecting the disturbances effect are some advantages of the proposed method in comparing with the co...
متن کاملError Analysis and Compensation Method Of 6-axis Industrial Robot
Jianhao Zhang, Jinda Cai Numerical Control And Display Lab, USST, 200093 ShangHai,China Emails:[email protected] Abstract:A method of compensation is proposed based on the error model with the robot’s parameters of kinematic structure and the joint angle. Using the robot kinematics equation depending on D-H algorithm, a kinematic error model is deduced relative to the end actuator of the robot, ...
متن کاملA Wavelet-based Spoofing Error Compensation Technique for Single Frequency GPS Stationary Receiver
Spoofing could pose a major threat to Global Positioning System (GPS) navigation, so the GPS users have to gain an in-depth understanding of GPS spoofing. Since spoofing attack can influence position results, spoof compensation is possible through reducing position deviations. In this paper, a novel processing technique is proposed and the wavelet transform is used to eliminate the impact of sp...
متن کاملError measurements for flank milling
This paper presents and compares methods of error metrics used to measure the error for the flank milling of a machined ruled surface. The aim of this work is to propose a new scheme for error approximation that is easy to implement and gives better error assessment when using optimization techniques to determine tool position. We propose using as the error calculation an approximation to the d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2019
ISSN: 1881-3054
DOI: 10.1299/jamdsm.2019jamdsm0041