Defects formation mechanism and evaluation of surface roughness in machining Al/SiCp composites
نویسندگان
چکیده
منابع مشابه
The surface roughness and gloss of composites.
The contrast gloss and the average roughness were measured for four commercial composite filling materials. Using a factorial design, each material was subjected to four available finishing methods. A significant difference was found in the contrast gloss among finishing methods, and a significant linear regression is given which relates the inverse of the contrast gloss to the average roughnes...
متن کاملPrediction of Vibration Amplitude and Surface Roughness in Machining of Al6061 Metal Matrix Composites by Response Surface Methodology
In this work, the Prediction of acceleration amplitude and surface roughness of Aluminium alloy (Al6061), reinforced with 15% Silicon Carbide particle (SiCp) metal matrix composites, has been made in the end milling process considering various machining parameters. The MMC was considered the difficult to machining due its reinforcement hardness and nature of abrasive element and the prediction ...
متن کاملAnfis Based Modeling for Prediction of Surface Roughness during Machining of Glass Fiber Reinforced Epoxy Composites
Recently, the worldwide globalization and erotic development in the technological field has created immense market competition. Industries are now concerned on focusing towards refined product quality and increased productivity. In a mass production line, selection of appropriate parameter setting is indeed essential to avoid compromise in terms of quality as well as productivity. Product quali...
متن کاملAn Experimental Investigation on Surface Roughness and Edge Chipping in Micro Ultrasonic Machining
Surface quality including surface roughness and edge chipping is a key process measure in micro ultrasonic machining (Micro-USM) as an efficient process for micromachining of hard and brittle materials. Process parameters such as ultrasonic vibration amplitude, static load, type of tool material, type and size of abrasive particles and slurry concentration can influence the surface quality. How...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Advanced Mechanical Design, Systems, and Manufacturing
سال: 2018
ISSN: 1881-3054
DOI: 10.1299/jamdsm.2018jamdsm0005