Decarburization Behavior of Molten Steel Using Top-blown Oxygen Jet under Reduced Pressure
نویسندگان
چکیده
منابع مشابه
Model-based Slopping Detection in a Top-blown Steel Converter
The most common steel-making process in the world is the Lintz-Donawitz converter. During operation, a slag foam is created to improve the converter performance. Problems arise when the foam level exceeds the height of the vessel and overflows, causing metal loss, process disruption and environmental pollution. The goal of this study is to design a model-based algorithm exploiting real-time pro...
متن کاملEffects of Temperature and Oxygen Concentration on the Characteristics of Decarburization of 55SiCr Spring Steel
Effects of temperature and oxygen concentration on decarburization of 55SiCr spring steel were investigated at the temperature range of 500°C–1 200°C by using a Muffle furnace (an atmosphere of ambient air) and a Simultaneous Thermal Analyzer (low oxygen concentration with 2% O2 and 98% N2). In ambient air, the decarburization behavior can be divided roughly into five temperature ranges: T≥1 20...
متن کاملTetrahedral clustering in molten lithium under pressure.
A series of electronic and structural transitions are predicted in molten lithium from first principles. A new phase with tetrahedral local order characteristic of sp3 bonded materials and poor electrical conductivity is found at pressures above 150 GPa and temperatures as high as 1000 K. Despite the lack of covalent bonding, weakly bound tetrahedral clusters with finite lifetimes are predicted...
متن کاملMeasurement of Decarburization of Heat Treated Steel Surfaces
Decarburization is a significant problem in the heat treatment of steels as decarburization is detrimental to wear life and fatigue life of components. This presentation concentrates on its measurement by four procedures. Test results from an interlaboratory test of steels with spheroidize annealed, lamellar pearlite (normalized) and quenched and tempered martensitic microstructures were evalua...
متن کاملRemoval of MnS inclusions in molten steel using electropulsing
A method using electropulsing to separate inclusions from molten steel is developed, based on the differences in electrical properties between the inclusions and liquid metal. The inclusions have different electrical resistivity from that of the liquid steel and hence being expelled to the surface of the metal by electropulsing. In comparison with the as-solidified untreated steel, the size of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 2007
ISSN: 1883-2954,0021-1575
DOI: 10.2355/tetsutohagane.93.265