Deadbeat predictive current control of PMSM drives with an adaptive flux‐weakening controller
نویسندگان
چکیده
In practical application, the motor speed may need to be greater than rated speed, so field-weakening control is required. However, conventional flux-weakening requires much tuning work, because multiple PI controllers are used. order make work easier, this paper combines with deadbeat predictive current (DPCC) eliminate two in loop. addition, also proposes a adaptive controller, which can further simplify work. The effectiveness of method has been confirmed on 2.2 kW surface permanent magnet synchronous (SPMSM) experimental platform.
منابع مشابه
Speed Control of PMSM Drives by Using Neural Network Controller
This paper presents modeling, controller design and simulation of a PMSM drive. The hysteresis current controller is used for inner loop current control and PI controller for outer loop speed control. In this paper the design of a Neural Network based approach is used to enhance efficiency in a vector control of Permanent Magnet synchronous Motors (PMSM). The conventional Proportional-Integral ...
متن کاملMean and Diffrential Torque Control Using Hysteresis Current Controller for Dual Pmsm Drives
The dual motor drives fed by a single inverter are purposely designed to reduce size and cost with respect to single motor drives fed by a single inverter. This paper presents the speed responses behavior of Dual Permanent Magnet Synchronous Motor (PMSM) driven by Mean and Differential Torque Control technique. The drive is simulated by using Hysteresis Current Controller. MATLAB/Simulink is ch...
متن کاملSensorless Motor Drives with Predictive Current Control
Hardware complexity of a motor drive can be reduced by estimating controls rather than measuring using sensors. In this way the corresponding sensors are eliminated and the system becomes more robust. This article is about speed control of a sensor less induction motor with predictive current controller technique. This particular speed control technique does not require direct measurements of m...
متن کاملCombined Speed and Current Model Predictive Control for energy-efficient PMSM Drives
The paper deals with the Model Predictive Control (MPC) algorithm applied to control a permanent magnet synchronous motor, which is, at present, among the motors with the highest power efficiency and then very attractive for energy–saving applications. Absolute novelty of the proposed MPC is its feature of inherently managing the flux weakening control above base speed. Speed and current contro...
متن کاملFuzzy Rule – Based Model Reference Adaptive Control for PMSM Drives
The objective of the model reference adaptive fuzzy control (MRAFC) is to change the rules definition in the direct fuzzy logic controller (FLC) and rule base table according to the comparison between the reference model output signal and system output. The MRAFC is composed by the fuzzy inverse model and a knowledge base modifier. Because of its improved algorithm, the MRAFC has fast learning ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Iet Power Electronics
سال: 2022
ISSN: ['1755-4535', '1755-4543']
DOI: https://doi.org/10.1049/pel2.12265