Deactivation of platinum catalysts by oxygen 2. Nature of the catalyst deactivation

Catalyst deactivation

The fundamentals of catalyst deactivation are presented in this review. The chemico-physical aspects concerning the various deactivation causes (i.e. poisoning, sintering, coking, solid-state transformation, masking, etc.) have been analyzed and discussed, along with the mathematical description of the deactivation phenomena. # 1999 Elsevier Science B.V. All rights

Studying of Catalyst Deactivation in a Commercial Hydrocracking Process (ISOMAX)

Catalyst deactivation is usually indispensable, although the rate at which it occurs varies greatly. At first, this article discusses the causes of deactivation in a commercial hydrocracking unit called Isomax. Then, a 5-lump kinetic model including catalyst decay function for hydrocracking of vacuum gas oil in a commercial plant is proposed. The model considers vacuum gas oil (VGO) having boil...

Deactivation on vehicle-aged diesel oxidation catalysts

This paper studies oxidation catalytic converters that were vehicle-aged in a diesel automobile. The deposition of several atoms (S, P, C, Si, Ca, Zn and Fe) was detected by several chemical analysis techniques. Moreover, AlPO4 and Al2(SO4)3 were identified by XRD. The catalytic performance of the aged catalysts with different mileages showed a similar degree of deactivation for CO and C3H6 oxi...

Heterogeneous Catalyst Deactivation and Regeneration: A Review

Deactivation of heterogeneous catalysts is a ubiquitous problem that causes loss of catalytic rate with time. This review on deactivation and regeneration of heterogeneous catalysts classifies deactivation by type (chemical, thermal, and mechanical) and by mechanism (poisoning, fouling, thermal degradation, vapor formation, vapor-solid and solid-solid reactions, and attrition/crushing). The key...

Advances in Catalyst Deactivation and Regeneration