Dc fault current calculation method in MMC‐HVDC grid considering current‐limiting devices
نویسندگان
چکیده
منابع مشابه
Unbalanced and over current Fault protection in low voltage DC bus micro grid systems
Unlike traditional AC distribution systems, protection has been challenging for DC systems. Multi-terminal DC power systems do not have the years of practical experience and standards that AC power systems have. Also, the current power electronic devices cannot survive or sustain high magnitude faults. Converters will shut down to protect themselves under faulted conditions. This makes locating...
متن کاملInfluence of Fault Current Limiter in Voltage Drop and TRV Considering Wind Farm
Influence of distributed generation systems in the distribution systems can increase the level of short-circuit current. The effectiveness of distributed generation systems is affected by the size, location, type of distributed generation systems technology, and the methods of connecting to distribution systems. Wind turbine system is the examples of distributed generation source. Not only does...
متن کاملDesign of A Single-Phase Transformerless Grid-Connected PV Inverter Considering Reduced Leakage Current and LVRT Grid Codes
A new single-phase transformerless grid-connected PV inverter is presented in this paper. Investigations in transformerless grid-connected PV inverters indicate the existence of the leakage current is directly related to the variable common-mode voltage (CMV), which is presented in detail. On the other hand, in recent years it has become mandatory for the transformerless grid-connected PV inver...
متن کاملImproving grid fault tolerance by optimal control of FACTS devices
One of the most promising applications of the family of electronic devices called Flexible AC Transmission System (FACTS) devices is to better regulate power flow in transmission grids. In particular, the Unified Power Flow Controller (UPFC) is the best choice for complete control of power flow control. By selecting proper installation locations and control techniques, UPFCs may be able to prev...
متن کاملSelection of Resistive and Inductive Superconductor Fault Current Limiters Location Considering System Transient Stability
Superconductor fault current limiter (SFCL) is an effective device to suppress high fault currents. This paper presents a comparative study of resistive and inductive fault current limiters from transient stability point of view. Appropriate location and type of the limiters in a HV substation is selected by a qualitative approach based on the equal area criterion. Study system is simulated by...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Engineering
سال: 2018
ISSN: 2051-3305,2051-3305
DOI: 10.1049/joe.2018.8766