Damping properties of open cell microcellular pure Al foams
نویسندگان
چکیده
منابع مشابه
The linear elastic properties of microcellular foams
The mechanical behaviour of a new type of open-cell foam made by a thermally induced phase separation (TIPS) process was investigated. Foams made by the TIPS process are characterized by cell sizes which are 10-100 times smaller than conventional foam materials. In this work, the linear elastic modulus of these foams in dynamic tension/compression was measured. A comparison was made with the th...
متن کاملMicrocellular foams made from gliadin
We have generated closed-cell microcellular foams from gliadin, an abundantly available wheat storage protein. The extraction procedure of gliadin from wheat gluten, which involves only the natural solvents water and ethanol, respectively, is described with emphasis on the precipitation step of gliadin which results in a fine dispersion of mostly spherical, submicron gliadin particles composed ...
متن کاملCompressive Properties of Open-Cell Al Hybrid Foams at Different Temperatures
Hybrid Ni/Al foams were fabricated by depositing electroless Ni-P (EN) coatings on open-cell Al foam substrate to obtain enhanced mechanical properties. The microstructure, chemical components and phases of the hybrid foams were observed and analyzed by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD), respectively. The mechanical proper...
متن کاملTensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes
Polyamide 6 (PA6) is used in many applications due to its advantages and improving its properties seems essential. For this purpose in the present study, PA6 was melt compounded with various multi-walled carbon nanotubes (MWCNTs) contents and then was foamed using Azodi carbon amide (ACA) as blowing agent under different injection molding conditions. Morphological properties were investigated u...
متن کاملDAMPING PROPERTIES OF OPEN PORE ALUMINUM FOAMS PRODUCED BY VACUUM CASTING AND NaCl DISSOLUTION PROCESS
L. Dahil, Istanbul Arel University, Department of Mechanical and Metal Technologies, Turkey, A. Karabulut, Afyon Kocatepe University, Faculty of Technology, MechanicalEngineering, Turkey, S. Baspınar, Afyon Kocatepe University, Technical EducationFaculty, Turkey In this study,damping ratios of 3 samples made of aluminum foam material, which have diff erent-density pores, were calculated, the ef...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Technology
سال: 2007
ISSN: 0267-0836,1743-2847
DOI: 10.1179/174328407x226707