Damage Source Identification of Reinforced Concrete Structure Using Acoustic Emission Technique
نویسندگان
چکیده
منابع مشابه
Damage Source Identification of Reinforced Concrete Structure Using Acoustic Emission Technique
Acoustic emission (AE) technique is one of the nondestructive evaluation (NDE) techniques that have been considered as the prime candidate for structural health and damage monitoring in loaded structures. This technique was employed for investigation process of damage in reinforced concrete (RC) frame specimens. A number of reinforced concrete RC frames were tested under loading cycle and were ...
متن کاملMonitoring Damage Using Acoustic Emission Source Location and Computational Geometry in Reinforced Concrete Beams
Non-destructive testing in reinforced concrete (RC) for damage detection is still limited to date. In monitoring the damage in RC, 18 beam specimens with varying water cement ratios and reinforcements were casted and tested using a four-point bending test. Repeated step loads were designed and at each step load acoustic emission (AE) signals were recorded and processed to obtain the acoustic em...
متن کاملA study of acoustic emission technique for concrete damage detection
A study of acoustic emission technique for concrete damage detection", Master's report,
متن کاملAcoustic Emission Source Identification in Large Scale Fibre Reinforced Composites
Within the last decades many approaches have been proposed to perform source identification in fibre reinforced composites. Some of them have been validated using skilled micromechanical experiments or by using reference specimens in combination with imaging methods, leaving strong evidence that these approaches are valid tools to perform source identification tasks. Lately, also numerical meth...
متن کاملDamage inspection of fiber reinforced polymer-concrete systems using a distant acoustic-laser NDE technique
In this paper, a distant acoustic-laser NDE technique is proposed, utilizing a high powered standoff parametric acoustic array (PAA) and laser Doppler vibrometry (LDV), for the detection of debonding and delamination in multi-layer composite systems. Fiber-reinforced polymer wrapped concrete cylinder specimens with artificial defect were manufactured and used in the validation of the technique....
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Scientific World Journal
سال: 2013
ISSN: 1537-744X
DOI: 10.1155/2013/870585