Damage performance of a shaped charge liner fabricated from Ti-29Nb-13Ta-4.6Zr alloy
نویسندگان
چکیده
Abstract The change of the liner material directly affects penetration and damage performance shaped charge. In this paper, Ti-29Nb-13Ta-4.6Zr (TNTZ) was used as charge liner. Autodyn software to analyze jet formation TNTZ liner, then static explosion test conducted liners. following conclusions were obtained: A structure proposed for alloy, simulation shows that a with acceptable L/D ratio formed, head velocity around 6000 m/s. successfully ignited fuel tank after penetrating steel target due chemical reaction. For tests on C35 concrete targets, has horizontal effect which leads tunnel large diameter, however depth is smaller compared Cu Such behavior makes good candidate forward tandem warheads.
منابع مشابه
Influence of Alloy Elements on the Osteoconductivity of Anodized Ti-29Nb-13Ta-4.6Zr Alloy
Anodizing is expected to be an effective method to improve the osteoconductivity of the Ti-29Nb-13Ta-4.6Zr (TNTZ) alloy because the bioactivity of anodized Ti is good. However, it is not known how the alloy elements influence the surface roughness, composition, hydrophilicity, and osteoconductivity of the anodized film on the Ti alloy. In this study, we investigated the effects of anodizing on ...
متن کاملIn vivo osteoconductivity of surface modified Ti-29Nb-13Ta-4.6Zr alloy with low dissolution of toxic trace elements
Simulated Body Fluid (SBF) has served as a useful standard to check the bioactivity of implant materials for years. However, it is not perfectly able to imitate human serum; sometimes disparities between the SBF test and animal test were confirmed. Therefore, to ensure the reliability of the results of the SBF test obtained from our previous study, an animal study was performed to check osteoco...
متن کاملIsotropic plasticity of β-type Ti-29Nb-13Ta-4.6Zr alloy single crystals for the development of single crystalline β-Ti implants
β-type Ti-29Nb-13Ta-4.6Zr alloy is a promising novel material for biomedical applications. We have proposed a 'single crystalline β-Ti implant' as new hard tissue replacements for suppressing the stress shielding by achieving a drastic reduction in the Young's modulus. To develop this, the orientation dependence of the plastic deformation behavior of the Ti-29Nb-13Ta-4.6Zr single crystal was fi...
متن کاملErratum: Isotropic plasticity of β-type Ti-29Nb-13Ta-4.6Zr alloy single crystals for the development of single crystalline β-Ti implants
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the mater...
متن کاملHigh Bone Bonding Ability and Affinity of New Low-rigidity β-type Ti-29Nb-13Ta-4.6Zr Alloy as a Dental Implant
Hiroshi Edamatsu1, Tadashi Kawai1, Keiko Matsui1, Masaaki Nakai2, Tetsu Takahashi1, Seishi Echigo1, Mitsuo Niinomi2 and Shinji Kamakura3* 1Division of Oral and Maxillofacial Surgery, Department of Oral Medicine and Surgery, Tohoku University Graduate School of Dentistry, 4-1 Seiryomachi, Aoba-ku, Sendai 980-8575, Japan 2Department of Biomaterials Science, Institute for Materials Research, Tohok...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2023
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2478/3/032090