Damage mechanisms at room and high temperature in notched specimens of Al6061/Al2O3 particulate composites
نویسندگان
چکیده
منابع مشابه
Fracture Mechanism of a Bainite Steel in Precracked and Notched Specimens at Low Temperature
Precracked and notched specimens were used to investigate the fracture mechanism of a bainite steel at low temperature. The critical fracture event was studied using metallographic sectioning method. The results showed that the critical cleavage event was different in the precracked and the notched specimens. At -196C, all specimens fractured at lower-shelf region without any ductile crack grow...
متن کاملEffect of Broaching on High Temperature Fatigue Behaviour in Notched Specimens of Inconel
Notches were machined in specimens of Inconel 718 by a broaching process, where differing broaching runs led to differing extents of sub-surface deformation and surface roughness. Fatigue tests were carried out at 600 ̊C with a trapezoidal loading waveform at 0.25Hz. The broaching process that led to the more severe sub-surface deformation (but lower surface roughness) showed the worst fatigue p...
متن کاملPlasticity mechanisms in HfN at elevated and room temperature
HfN specimens deformed via four-point bend tests at room temperature and at 2300 °C (~0.7 Tm) showed increased plasticity response with temperature. Dynamic diffraction via transmission electron microscopy (TEM) revealed ⟨110⟩{111} as the primary slip system in both temperature regimes and ⟨110⟩{110} to be a secondary slip system activated at elevated temperature. Dislocation line lengths chang...
متن کاملstudying room temperature curing of phenolic resin and their composites
phenolic resins are synthetic low molecular weight thermoset resins which are polymerized and cured to higher molecular weights by condensation method. these resins have high weathering resistance, high oxidative thermal properties and good chemical resistance. phenolic resins can be cured thermally or by acid curing. the most common method of curing phenolic resin is by thermal curing that tak...
متن کاملComparison of Tribological Behavior of Deep Cryogenic Treated Hot Work Tool Steel at Room and High Temperature
The deep cryogenic treatment is a complementary operation that is done on a variety of tool steels aimed at improving their abrasion resistance and hardness. In the case of the H13 hot-work steel, which is widely used at high temperatures as a hot-deformation tool, we need to determine the efficiency of subzero treatment on it at the working temperature. In this regard, this paper is focu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Composites Science and Technology
سال: 2008
ISSN: 0266-3538
DOI: 10.1016/j.compscitech.2007.03.014