Damage due to electric spark discharge machining of zinc
نویسندگان
چکیده
منابع مشابه
Parameters for Fabricating Nano-Au Colloids through the Electric Spark Discharge Method with Micro-Electrical Discharge Machining
In this study, the Electric Spark Discharge Method (ESDM) was employed with micro-electrical discharge machining (m-EDM) to create an electric arc that melted two electrodes in deionized water (DW) and fabricated nano-Au colloids through pulse discharges with a controlled on-off duration (TON-TOFF) and a total fabrication time of 1 min. A total of six on-off settings were tested under normal ex...
متن کاملRecent Advancement In Electric Discharge Machining , A Review
Electric discharge machining is non conventional machining process used for machining of hard materials which cannot machined by conventional machining process. Electric discharge machining is an electro sparking method of metal working involving an electric erosion effect. A pulse discharge occurs in a small gap between the work piece and the electrode and removes the unwanted material from th...
متن کاملInfluence of Machining Parameters on Electric Discharge Machining of Maraging Steels – An Experimental Investigation
thermoelectric process in which heat energy of spark is used to remove material from the work piece. The machining process involves controlled erosion of electrically conducting material by the initiation of rapid and repetitive electrical spark discharges between the tool and workpiece separated by the dielectric medium. The present work is aimed at characterizing the electric discharge machin...
متن کاملMetal Removal Rate Optimization in Electric Discharge Machining Process
Electrical discharging machining (EDM) has become an outstanding approach in the field of metal cutting especially for conductive metals. It’s very difficult to cut the conducting metals with the aid of traditional machining. The main object of the present work has to investigate the effects of various EDM input parameters like pulse on time (Ton) pulse off time (TOFF) as well as the influence ...
متن کاملEvaluation of Electric Discharge Machining to achieve Passive Fit of Implant Superstructure: An in vitro Study
Objective: To evaluate marginal discrepancies between cast implant superstructure and EDM processed implant structure. Materials and methods: For the purpose of this study, an experimental model was prepared on which nine cast implant superstructure in nickel-chromium were fabricated which was then subjected to EDM processing. One-screw test was used to verify fit of superstructure both preand ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering
سال: 1966
ISSN: 0025-5416
DOI: 10.1016/0025-5416(66)90013-9