Damage dependent material properties in a Finite Element Simulation of a hybrid forward extrusion process
نویسندگان
چکیده
منابع مشابه
Finite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کاملFinite Element Simulation of Hydrostatic Extrusion Process to Produce Thin Bimetallic Parts
The hydrostatic extrusion is a new method of extrusion process. The most important advantage of this method is reduction of friction and close tolerance for the coating thickness. In this study, the hydrostatic extrusion simulation of bimetallic wires has performed using of finite element method. In the following the advantages of hydrostatic extrusion compared to the direct extrusion are prese...
متن کاملSIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
n this paper a finite element model has been proposed for evaluation of primary and secondary current density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the nickel sulfate solution. Nickel electroplating experi...
متن کامل3d Finite Element Simulation of a Material Accumulation Process including Phase Transitions and a Capillary Surface
In this article, a 3D finite element simulation of a material accumulation process based on rod end and blank end melting is discussed. This process represents the first step of a two-level cold forming process in microrange and can be modeled mathematically by coupling the Stefan problem with the Navier-Stokes equations including a free capillary surface. Numerical results for melting the tip ...
متن کاملModeling and simulation of forward Al extrusion process using FEM
The main objective of this paper is to study the effect of extrusion parameters (extrusion stresses and temperature) and die geometry, i.e. extrusion radius, on the extruded aluminum quality using FEM Simulation Technique. For this purpose, the general FEA Software ABAQUS was used to set up the finite element model of the warm aluminum extrusion in two dimensions (2D). Aluminum alloy Al-2014 wa...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.10.801