Damage and fracture of ductile sheet metal: New biaxially loaded specimens for material parameter identification
نویسندگان
چکیده
منابع مشابه
A New Approach for Stress State - Dependent Flow Localization Failure Bounded Through Ductile Damage in Dynamically Loaded Sheets
In this paper, a new approach is proposed for stress state - dependent flow localization in bifurcation failure model bounded through ductile damage in dynamically loaded sheets. Onset of localized necking is considered in phenomenological way for different strain rates to draw the forming limit diagram (FLD). Using a strain metal hardening exponent in the Vertex theory related to the strain ra...
متن کاملZinc Chloride, A New Material for Embalming and Preservation of the Anatomical Specimens
Introduction: Formaldehyde is one of the most common chemicals used for embalming and as a result teaching anatomy. Because of the adverse effects of formaldehyde on human health and also its environmental complications, this study was conducted to investigate a new solution containing zinc chloride for fixation and preservation of anatomical specimens. Methods: In this study, we used 40...
متن کاملFracture Behavior Prediction for Rapidly Loaded Surface Cracked Specimens
The feasibility of predicting the fracture behavior of surface cracks from shallow cracked bend specimens was investigated. The material studied was a high-strength steel stress relief embrittled to various levels of Charpy-V notch impact toughness. Material toughness was quantified in terms of the J-intergral at total specimen failure (-/„,,), using both deeply notched and shallow-notched bend...
متن کاملA NEW DAMAGE INDEX FOR STRUCTURAL DAMAGE IDENTIFICATION BY MEANS OF WAVELET RESIDUAL FORCE
In this paper a new method is presented for structural damage identification. First, the damaged structure is excited by short duration impact acceleration and then, the recorded structural displacement time history responses under free vibration conditions are analyzed by Continuous Wavelet Transform (CWT) and Wavelet Residual Force (WRF) is calculated. Finally, an effective d...
متن کاملCrack Tip Constraint for Anisotropic Sheet Metal Plate Subjected to Mode-I Fracture
On the ground of manufacturing, sheet metal parts play a key role as they cover about half of the production processes. Sheet metals are commonly obtained from rolling and forming processes which causes misalignment of micro structure resulting obvious anisotropic characteristics and micro cracks. Presence of micro cracks poses serious attention, when stresses at the tip reach to the critical v...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Structural Integrity
سال: 2018
ISSN: 2452-3216
DOI: 10.1016/j.prostr.2018.12.007