Damage and fracture in fabric-reinforced composites under quasi-static and dynamic bending

Impact Damage in Woven Fabric Reinforced Composites

INTRODUCTION Very often, woven fabrics are used as the reinforcement in advanced composite materials. Although the resulting inplane stiffness is lower than of their unidirectional counterparts, the excellent drapability of these materials eases the production of more general doubly curved components. In addition, the inherently low out-of-plane strength of these layered materials improves due ...

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test

fracture strength and bending of fiber-reinforced composites and metal frameworks in fixed partial dentures

objective: this in vitro study evaluated the fracture strength and bending amount of twotypes of fiber reinforced composite (frc) and cast metal frameworks used for fabrication of inlay fixed partial dentures (ifpds). materials and methods: seventy-two extracted first maxillary premolars and molars (36 each) were embedded in acrylic resin to represent a missing of second maxillary premolar. frc...

Quasi-static and dynamic fracture of graphite/epoxy composites: An optical study of loading-rate effects

Strain-rate effects on fracture behavior of unidirectional composite materials are studied. Single-edge notched multi-layered unidirectional graphite composites (T800/3900-2) are investigated to examine fracture responses under static and dynamic loading conditions using a digital speckle correlation method. The fracture parameters for growing cracks are extracted as a function of fiber orienta...

Dynamic and Quasi-Static Tensile Properties of Structural S400 Steel

The study of mechanical behavior of the structural steel S400 under quasi- static and dynamic loading has been the subject of this investigation. In oder to obtain different stress - triaxiality conditions the specimens were notched with 1, 1.5, 2 and 3.5 mm notch radius. The results of fractography show as the velocity of tension increases, ductility reduces and a ductile-brittle transition oc...