CZTS thin film solar cells on flexible Molybdenum foil by electrodeposition-annealing route
نویسندگان
چکیده
منابع مشابه
Polycrystalline Thin-Film Cadmium Telluride Solar Cells Fabriacted by Electrodeposition
This publication was reproduced from the best available copy Submitted by the subcontractor and received no editorial review at NREL NOTICE This report was prepared as an account of work sponsored by an agency of the United States government. Neither the United States government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liab...
متن کاملLatest Results on Stabilized Flexible Thin Film Silicon Solar Cells
Our primary goal is to increase the stabilized efficiency of thin film silicon solar cells in the substrate (nip) configuration by using textured substrates and tandem structures, based on amorphous (a-Si:H) and microcrystalline silicon (μc-Si:H). In order to reduce costs of mass-produced thin film solar modules, special attention has been paid in developing processes compatible with plastic fo...
متن کاملEffect of Annealing on Physical Properties of Cu2ZnSnS4 (CZTS) Thin Films for Solar Cell Applications
Cu2ZnSnS4 (CZTS) thin films were prepared by directly sputteringCu (In,Ga)Se2 quaternary target consisting of (Cu: 25%, Zn: 12.5%, Sn; 12.5%and S: 50%). The composition and structure of CZTS layers have beeninvestigated after annealing at 200 0C, 350 0C and 500 0C under vacuum. Theresults show that recrystallization of the CZTS thin film occurs and increasingthe grain size with a preferred orie...
متن کاملOptimization of Annealing Process for Totally Printable High-current Superstrate CuInS2 Thin-Film Solar Cells
Planar superstrate CuInS2 (CIS) solar cell devices are fabricated using totally solution-processed deposition methods. A titanium dioxide blocking layer and an In2S3 buffer layer are deposited by the spray pyrolysis method. A CIS2 absorber layer is deposited by the spin coating method using CIS ink prepared by a 1-butylamine solvent-based solution at room temperature. To obtain optimum annealin...
متن کاملFlexible carbon nanotube/mono-crystalline Si thin-film solar cells
Flexible heterojunction solar cells were fabricated from carbon nanotubes (CNTs) and mono-crystalline Si thin films at room temperature. The Si thin films with thickness less than 50 μm are prepared by chemically etching Si wafer in a KOH solution. The initial efficiency of the thin-film solar cell varies from approximately 3% to 5%. After doping with a few drops of 1 M HNO3, the efficiency inc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Applied Electrochemistry
سال: 2020
ISSN: 0021-891X,1572-8838
DOI: 10.1007/s10800-020-01494-1