Cytocompatibility for Co-Cr-Mo Alloy with a Small Amount of Zirconium or Carbon
نویسندگان
چکیده
منابع مشابه
CORROSION RESISTANCE OF Co-Cr-Mo ALLOY USED IN DENTISTRY ODPORNOŚĆ KOROZYJNA STOPU Co-Cr-Mo WYKORZYSTYWANEGO W STOMATOLOGII
The presented paper studies the effect of the casting technology on the corrosion resistance of Co-Cr-Mo alloy. The investigations were conducted on a commercial alloy with the brand name ARGELOY N.P SPECIAL (Co-Cr-Mo) produced by Argen as well as the same alloy melted and cast by the lost wax casting method performed by a dental technician. The corrosion behavior of the dental alloys in an art...
متن کاملEvaluation of the castability of a Co-Cr-Mo-W alloy varying the investing technique.
The purpose of this study was to compare the castability of Co-Cr-Mo-W (Remanium 2000), Ni-Cr (Durabond) and Co-Cr-Mo (Vera PDI) alloys invested with either conventional (phosphate- and silica-based) or mixed investing techniques. A 10 X 10 mm square-shaped nylon net containing 100 open squares served as a template for construction of wax patterns, which were invested with phosphate-based inves...
متن کاملElectron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications
The Electron Beam Melting (EBM) manufacturing process is emerging as an additional method for producing orthopaedic devices in several materials, including Co-Cr-Mo Alloy. This work presents the chemical, microstructural and mechanical properties of several test specimens produced by the EBM process before and after a post‐EBM Heat treatment. Comparisons are made to the properties of Co-Cr-Mo m...
متن کاملCOMPARATIVE STUDY OF CYTOTOXICITY OF DIRECT METAL LASER SINTERED AND CAST Co-Cr-Mo DENTAL ALLOY
T. Puskar, Department of Dentistry, Medical Faculty, University of Novi Sad, Serbia. A. Lapcevic, D. Jevremovic, Clinic for Prosthodontics, School of Dentistry Pančevo, University Business Academy, Novi Sad, Serbia. S. Arandjelovic, S. Radulovic, Institute for Oncology and Radiology of Serbia, Belgrade, Serbia. I. Budak, Dj. Vukelic, Faculty of Technical Sciences, University of Novi Sad, Novi S...
متن کاملComparison of Dental Prostheses Cast and Sintered by SLM from Co-Cr-Mo-W Alloy
The article presents the results of a comparative analysis of the metal substructure for dental prosthesis made from a Co-Cr-Mo-W alloy by two techniques, i.e. precision investment casting and selective laser melting (SLM). It was found that the roughness of the raw surface of the SLM sinter is higher than the roughness of the cast surface, which is compensated by the process of blast cleaning ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals
سال: 2007
ISSN: 1880-6880,0021-4876
DOI: 10.2320/jinstmet.71.578