Cyclostrophic adjustment and cooling processes in Ranque-vortex tube
نویسندگان
چکیده
منابع مشابه
A new approach to selective brain cooling by a Ranque-Hilsch vortex tube
BACKGROUND Target temperature management is the single most effective intervention and the gold standard in post-resuscitation care today. However, cooling the whole body below 33-34 °C can cause severe complications. Therefore, developing a selective brain cooling (SBC) approach which can be initiated early to induce rapid cooling and maintain the target temperature over 12-24 h before slowly ...
متن کاملMaxwell's demon in the Ranque-Hilsch vortex tube.
A theory was developed that explains energy separation in a vortex tube, known as one of the Maxwellian demons. It appears that there is a unique relation between the pressures in the exits of the vortex tube and its temperatures. Experimental results show that the computed and measured temperatures are in very good agreement.
متن کامل3D Velocimetry and droplet sizing in the Ranque–Hilsch vortex tube
The Ranque–Hilsch vortex tube (RHVT) is a device currently used to generate local cooling. In general, the fluid that is injected into the RHVT is a single-phase gas. In this study, however, we have added a dispersed phase (water droplets) to the gas (nitrogen). By means of phase Doppler particle analysis, three velocity components, their higher order moments, and sizes of droplets were measure...
متن کامل2D Numerical Simulation of a Micro Scale Ranque-Hilsch Vortex Tube
In this study, fluid flow and energy separation in a micro-scale Ranque-HilschVortex Tube are numerically investigated. The flow is assumed as 2D, steady,compressible ideal gas, and shear-stress-transport SST k-W is found to be a bestchoice for modeling of turbulence phenomena. The results are in a good agreementwith the experimental results reported in the literature. The results show that f...
متن کاملPerformance Evaluation of a Ranque-Hilsch Vortex Tube with Optimum Geometrical Dimensions
A brass Vortex Tube (VT) with interchangeable parts is used to determine the optimum cold end orifice diameter, main tube length and diameter. Experim...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Low-Carbon Technologies
سال: 2007
ISSN: 1748-1317
DOI: 10.1093/ijlct/2.1.10