Cyclic viscoelastoplasticity of polypropylene/nanoclay composites
نویسندگان
چکیده
منابع مشابه
Isothermal and cyclic oxidation of TiAl composites
Titanium Aluminide and TiAl matrix composites reinforced with alumina fibers (PRD166) were fabricated by powder metallurgy. During isothermal oxidation at 950 and 1070 OC, composites containing PRD166 fibers exhibited larger weight gains than monolithic TiAI; the composites showed evidence of oxidation along the perimeter of the fibers. A fiber reaction, which was observed after oxidation in ai...
متن کاملan inverstigation into the shrinkage behavior (kinetics) of microfilled hybrid and nano dental composites
چکیده ندارد.
15 صفحه اولEffect of Cyclic Compression Loading On Crushing Response of Polymer Based Composites Sandwich Panels
The objective of work was focused to investigate microstructure of polyurethane foam and cyclic crushing strength of its sandwich structure which made of sisal / coir / bamboo / glass fabrics as reinforcement with polyester resin to form composites skin. The tested sandwich panels were constructed four type of FRP faceplates made of sisal / coir / bamboo / glass fiber reinforcements impregnated...
متن کاملComparison of Cyclic Hysteresis Behavior between Cross-Ply C/SiC and SiC/SiC Ceramic-Matrix Composites
In this paper, the comparison of cyclic hysteresis behavior between cross-ply C/SiC and SiC/SiC ceramic-matrix composites (CMCs) has been investigated. The interface slip between fibers and the matrix existed in the matrix cracking mode 3 and mode 5, in which matrix cracking and interface debonding occurred in the 0° plies are considered as the major reason for hysteresis loops of cross-ply CMC...
متن کاملModeling Cyclic Fatigue Hysteresis Loops of 2D Woven Ceramic Matrix Composites at Elevated Temperatures in Steam
In this paper, the cyclic fatigue hysteresis loops of 2D woven SiC/SiC ceramic matrix composites (CMCs) at elevated temperatures in steam have been investigated. The interface slip between fibers and the matrix existing in matrix cracking modes 3 and 5, in which matrix cracking and interface debonding occurred in longitudinal yarns, is considered as the major reason for hysteresis loops of 2D w...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanics of Time-Dependent Materials
سال: 2012
ISSN: 1385-2000,1573-2738
DOI: 10.1007/s11043-012-9169-x