Cyclic simple shear test of material for cold forging
نویسندگان
چکیده
منابع مشابه
Compaction of a granular material under cyclic shear
In this paper we present experimental results concerning the compaction of a granular assembly of spheres under periodic shear deformation. The dynamic of the system is slow and continuous when the amplitude of the shear is constant, but exhibits rapid evolution of the volume fraction when a sudden change in shear amplitude is imposed. This rapid response is shown to be to be uncorrelated with ...
متن کاملMicromechanics of soil responses in cyclic simple shear tests
Offshore wind turbine (OWT) foundations are subjected to a combination of cyclic and dynamic loading arising from wind, wave, rotor and blade shadowing. Under cyclic loading, most soils change their characteristics including stiffness, which may cause the system natural frequency to approach the loading frequency and lead to unplanned resonance and system damage or even collapse. To investigate...
متن کاملPrediction of Residual Stresses for a Hollow Product in Cold Radial Forging Process
Radial forging is an open die forging process used for reducing the diameters of shafts, tubes, stepped shafts and axles and also for creating internal profiles such as rifling the gun barrels. The radial forging of tube is usually performed over a mandrel to create an internal profile and/or size the internal diameter. Most of the previous studies conducted on the radial forging process have u...
متن کاملQuantitative shear wave magnetic resonance elastography: comparison to a dynamic shear material test.
Magnetic resonance elastography (MRE), a phase contrast MRI technique, images the propagation of applied mechanical waves in tissue, allowing shear stiffness to be quantified in vivo. This MRE technique has been validated with static mechanical compression tests. Dynamic mechanical analysis (DMA) may be a more appropriate comparison to MRE because it directly measures the shear modulus dynamica...
متن کاملThe stress tensor for simple shear flows of a granular material
The complete stress tensor has been measured using a computer simulation of an assemblage of rough, inelastic spheres in an imposed simple shear flow. Only five components of the stress tensor were found to be significantly different from zero. These represent the disperssive normal stresses 7,,, 7yy and 7,, and the in-the-shearplane shear stresses 7,y and 7yz; furthermore, the two off-diagonal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2018
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2018.07.243