Cyclic Sequential Removal of Alizarin Red S Dye and Cr(VI) Ions Using Wool as a Low-Cost Adsorbent

Removal of Alizarin Red Dye Using Calcium Hydroxide as a Low-cost Adsorbent

Calcium ions have very strong affinity and binds effectively to alizarin red dye during staining of biomaterials. This promotes us to choose calcium hydroxide as a low cost adsorbent for the removal of alizarin red dye. Various parameters such as pH, concentration, dose of adsorbent, time, and temperature have been investigated. In addition, enthalpy, entropy, free energy and activation energy ...

removal of alizarin red dye using calcium hydroxide as a low-cost adsorbent

Red Reactive 2 Dye Removal from Aqueous Solutions by Pumice as a Low-Cost and Available Adsorbent

Background & Aims of the Study: Azo dyes are used in industrial processes such as textile industry to produce large quantities of colored effluents that contain organic and non-organic materials. So, effective and efficient treatment of them is important for the environmental protection. The aim of this study was to evaluate the efficiency of powder and granular pumice for the ...

Removal of Reactive Red 120 from Aqueous Solutions Using Albizia lebbeck Fruit (Pod) Partical as a Low Cost Adsorbent

Synthetic dyes are using extensively in various industries such as textile, leather tanning, plastic, pulp and paper. Since this dyes are mainly toxic and even carcinogenic, discharging dye containing wastewater into the environment generates serious environmental and health consequences. Therefore, in this research investigated and evaluated the removal effect of Reactive Red 120 (RR 120) from...

Sawdust as a natural and low cost adsorbent for the removal of brilliant cresyl blue dye from water samples

Sawdust which is the main waste from wood industry has been used as a raw material forremoval of Brilliant Cresyl Blue toxic dye. The effects of various parameters such as pH,electrolyte concentration, adsorbent dose, contact time and agitation rate were studied for theremoval of the dye in a concentration of 50 mg L-1. The optimum condition for the studiedparameters was applied for various con...