Cyclic deformation of TiNi shape memory alloys.
نویسندگان
چکیده
منابع مشابه
Deformation Properties of TiNi Shape Memory Alloy
In order to describe the deformation properties due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy, a thermomechanical constitutive equation considering the volume fractions of induced phases associated with both transformations is developed. The proposed constitutive equation expresses well the properties of the shape memory effect, pseudoelasticity...
متن کاملLimitations of Constitutive Relations for TiNi Shape Memory Alloys
Phase transformation tensor Q in the constitutive equation pmposed by Tanaka has been evaluated by employing experimental data of TiNi alloys in a constrained recovery process. It demonstrates that the absolute value of Q for the consmined recovery process is typically about 0.6 0.7 x103 MPa, which is much smaller than that for the stress induced martensitic transformation (typically 2.5 3.5 x1...
متن کاملThermomechanical Properties of TiNi Shape Memory Alloy
The thermomechanical properties of shape memory effect and superelasticity due to the martensitic transformation and the R-phase transformation of TiNi shape memory alloy were investigated experimentally. The transformation line, recovery stress and fatigue property due to both transformations were discussed for cyclic deformation. The thermomechanical properties due to the R-phase transformati...
متن کاملTiNi shape memory alloys for MEMS : thin film deposition , thermophysical properties and laser micromachining characteristics
The growth of TiNi thin films by ion beam sputter deposition using a Kaufmann type ion source is described. Argon ions are used to sputter separate Ti and Ni targets to deposit nearequiatomic TiNi thin films. Typically, ion energies and current densities of 1500 eV and 1 mA cm respectively are used, with an argon overpressure of around 0.05 mtorr, to achieve deposition rates of order 1 μm hr. T...
متن کاملShape Memory Effect in Cast Versus Deformation-Processed NiTiNb Alloys
The shape memory effect (SME) response of a deformation-processed NiTiNb shape memory alloy is benchmarked against the response of a cast alloy. The insoluble Nb element ternary addition is known to widen the hysteresis with respect to the binary NiTi alloy. Cast microstructures naturally consist of a cellular arrangement of characteristic eutectic microconstituents surrounding primary matrix r...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series A
سال: 1991
ISSN: 0387-5008,1884-8338
DOI: 10.1299/kikaia.57.651