Cutting of ceramic materials by diamond coated cutting tools.
نویسندگان
چکیده
منابع مشابه
A Numerical Study of Interface Behavior of Diamond Coated Cutting Tools
Interface delamination is the major weakness limiting diamond coating tool performance in machining. Thus, quantitative characterizations of the interface behavior are important to better understand and design diamond coating tools. In this study, we attempt to apply a cohesive zone model to investigate the coating-substrate interface behavior. The cohesive zone model is based on the traction-s...
متن کاملCutting Performances of Nanocrystalline Diamond Coated Milling Tools in Machining Graphite
In this study, diamond films are deposited by using hot filament chemical vapor deposition (HFCVD), Nanocrystalline diamond (NCD) coated cemented tungsten carbide (WC-Co) milling tools are characterized, compared with microcrystalline diamond (MCD) and composite diamond coated ones, in terms of morphology with field emission scanning electron microscope (FESEM). Moreover, the diamond coated too...
متن کاملThe Effects of ZrO2 or Tic on the Performance of the Alumina-Based Ceramic Cutting Tools
Two types of alumina-based cutting tools with compositions of 90 vol.% Al2O3+10 vol.% ZrO2 and 80 vol.% A12O3+20 vol.% TiC are produced by isostatic pressing and sintering technique. The effects of these additives on the mechanical properties and cutting performance of these materials are investigated. The tool life in both materials is examined under identical conditions on cutting a grey cast...
متن کاملResearch on Cutting Performance of Ceramic Cutting Tools in Milling High Density Fiberboard
The effect of cutting parameters and tool parameters on cutting forces and tool wear were investigated in high density fiberboard (HDF) peripheral up-milling using toughened ceramic cutting tools. The results showed that whether at low speed cutting or high speed cutting, the tangential forces Ft and normal forces Fr increased slowly with the increase of cutting length. The tangential forces Ft...
متن کاملOn Stress Analysis of Diamond Coating Cutting Tools
Diamond coatings have been increasingly used in cutting tools applications. Coating delamination is the major tool failure mode and occurs due to deposition-induced residual stresses and thermomechanical loading in machining. This study applies finite element analysis to investigate stress distributions, with the edge radius focused, in diamond coating tools considering depositions and machinin...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society for Precision Engineering
سال: 1990
ISSN: 1882-675X,0912-0289
DOI: 10.2493/jjspe.56.1735