Cutting Edge of Abrasive Grit in Precision Grinding Operation Through Electromicroscope
نویسندگان
چکیده
منابع مشابه
Micro Cutting Simulation of Abrasive Grains in the Grinding Process
In the current work we present approach to study the mechanism of the cutting of abrasive grains in the grinding wheel using finite element analysis (FEA). The simulation process is done by separating two abrasive grains from the grinding wheels and the microprocess of material removal in the case of surface grinding is simulated. Modelling was done on the workpiece steel S-7 and material grain...
متن کاملFractal Analysis of Grain Cutting Edge Wear in Superabrasive Grinding
Abstract This paper deals with a fractal analysis of the wear behavior of the grain cutting edges in superabrasive grinding. Fundamental overcut fly grinding experiments for producing individual straight grooves using a grinding tool with multiple grits are carried out to clarify the wear characteristics of the grain cutting edges in the grinding process and then the change in three-dimensional...
متن کاملApplication of Abrasive Sand Blasting Process in Micro Geometrical Cutting Edge Optimization
Preliminary notes This paper aims to establish the parameters of optimization and geometrical improvements for the micro-geometry of solid carbide drills through the application of sand blasting process. The effects of sand blasting over the cutting edge and also upon the micro geometry of the tool body are to be taken into consideration. This process is one of the most common ones used in the ...
متن کاملSurface Texture in Abrasive Waterjet Cutting
When cutting thick material with an abrasive wateriet, the surface area can be characterized by two texture types. At the top of the cut, the surface texture is smooth. At the bottom, the slurry jet exiting the workpiece forms large striations in the surface. An investigation was conducted to experimentafly determine the influence of the abrasive waterjet cutting parameters on surface texture. ...
متن کاملLow Pressure Abrasive Waterjet Use for Precision Drilling and Cutting of Rock
Construction of a second theater underground at the Gateway Arch in St. Louis required a quiet, non-intrusive means of rock removal, capable of cutting the vertical walls of the theater down to a depth of 4.5 meters, within a vertical accuracy of 2.5 cm. A low pressure (35 MPa) abrasive laden waterjet was developed for this; and, also modified as an abrasive waterjet drill to emplace 25 mm diam...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1964
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.30.38