CuSCN as a hole transport layer in an inorganic solution-processed planar Sb<sub>2</sub>S<sub>3</sub> solar cell, enabling carbon-based and semitransparent photovoltaics
نویسندگان
چکیده
CuSCN as HTL is used in inorganic planar carbon electrode-based Sb 2 S 3 solar cells resulting a higher PCE (1.95%) compared to Au (PCE = 1.75%). Also, this device architecture enables semitransparent cell 1.67%, AVT 27.6%).
منابع مشابه
P3HT:PC61BM based solar cells employing solution processed copper iodide as the hole transport layer
A solution based approach to deposit a p-type CuI hole-transport layer that replaces PEDOT:PSS layer in the fabrication of high-efficiency poly(3-hexylthiophene):[6,6]-phenyl C61-butyric acid methyl ester (P3HT:PCBM) solar cells is reported here. X-ray diffraction analysis identifies the cubic γ-phase of CuI. A Kelvin probe measurement technique is utilized to identify the effective work functi...
متن کاملThermally Stable Solution Processed Vanadium Oxide as a Hole Extraction Layer in Organic Solar Cells
Low-temperature solution-processable vanadium oxide (V₂Ox) thin films have been employed as hole extraction layers (HELs) in polymer bulk heterojunction solar cells. V₂Ox films were fabricated in air by spin-coating vanadium(V) oxytriisopropoxide (s-V₂Ox) at room temperature without the need for further thermal annealing. The deposited vanadium(V) oxytriisopropoxide film undergoes hydrolysis in...
متن کاملSolution-processed solar cells based on inorganic bulk heterojunctions with evident hole contribution to photocurrent generation.
To develop solution-processed and novel device structures is of great importance for achieving advanced and low-cost solar cells. In this paper, we report the solution-processed solar cells based on inorganic bulk heterojunctions (BHJs) featuring a bulk crystalline Sb2S3 absorbing layer interdigitated with a TiO2 nanoarray as an electron transporter. A solution-processed amorphous-to-crystallin...
متن کاملSolution-processable graphene oxide as an efficient hole transport layer in polymer solar cells.
The utilization of graphene oxide (GO) thin films as the hole transport and electron blocking layer in organic photovoltaics (OPVs) is demonstrated. The incorporation of GO deposited from neutral solutions between the photoactive poly(3-hexylthiophene) (P3HT):phenyl-C61-butyric acid methyl ester (PCBM) layer and the transparent and conducting indium tin oxide (ITO) leads to a decrease in recomb...
متن کاملPlanar perovskite solar cells using fullerene C70 as electron selective transport layer
Owing amongst other to its high electron mobility, fullerene C70, has been widely used as an electron transporting layer in organic solar cells. In this research, we report the use of C70 thin films as electron transport layers of planar perovskite solar cells (PSCs) using a conventional device structure. The thickness of the C70 layer has been optimized to achieve the best efficiency of 12%. I...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Materials Chemistry C
سال: 2022
ISSN: ['2050-7526', '2050-7534']
DOI: https://doi.org/10.1039/d2tc03420d