CURVED-CRACK MODELING BY X-FEM AND ITS APPLICATION FOR SIMULATION OF CRACK GROWTH
نویسندگان
چکیده
منابع مشابه
Modeling and simulation of intersonic crack growth
Intersonic crack growth has been studied using an interfacial fracture model in which an additional material phase within a bonding layer is proposed to describe the failure behavior of the interface. In this material phase, a strain gradient based damage model is applied with a built-in cohesive law, which is governed by an material intrinsic length scale that bridges the mechanisms that opera...
متن کاملA two-parameter model for crack growth simulation by combined FEM-DBEM approach
This paper describes the application of a two-parameters crack growth model, based on the usage of two threshold material parameters (DKth and Kmax,th) and on the allowance for residual stresses, introduced at the crack tip by a fatigue load spectrum or by material plastic deformations. The coupled usage of finite element method (FEM) and dual boundary element method (DBEM) is proposed in order...
متن کاملCrack Linkup by Stable Crack Growth
Experimentally determined T ε and CTOA resistance curves were used to simulate numerically, stable crack growth and the ensuing crack linkup in 0.8 mm thick 2024-T3 aluminum tension specimen with multiple site damage (MSD) subjected to monotonically/cyclically increasing loading. The T ε integral correctly predicted the crack growth and linkup history as well as the onset of rapid fracture in M...
متن کاملParallel FEM Simulation of Crack Propagation - Challenges, Status, and Perspectives
Understanding how fractures develop in materials is crucial to many disciplines, e.g., aeronautical engineering, material sciences, and geophysics. Fast and accurate computer simulation of crack propagation in realistic 3D structures would be a valuable tool for engineers and scientists exploring the fracture process in materials. In the following, we will describe a next generation crack propa...
متن کاملX-FEM for Abaqus (XFA) Toolkit for Automated Crack Onset and Growth Simulation: New Development, Validation, and Demonstration
A software tool for automated crack onset and growth simulation based on the eXtended Finite Element Method (X-FEM) is developed. This XFA tool for the first time is able to simulate arbitrary crack growth or composite delamination without remeshing. The automated tool is integrated with Abaqus/Standard and Abaqus/CAE via the customization interfaces. It seamlessly works with the Commercial, Of...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshuu A
سال: 2007
ISSN: 1880-6023
DOI: 10.2208/jsceja.63.108