Curvature-Deflection Relations for Polypropylene Fiber-Reinforced Deflection-Hardening Alkali- Activated Slag Composite
نویسندگان
چکیده
To obtain a tensile strain-hardening behavior by using the ordinary polypropylene (PP) fiber, micromechanical model recommends increase of fiber low interfacial bond with an cementitious matrix. It was predicted that alkali-activated slag (AAS) composite high drying shrinkage performance would affect interface frictional during pullout.
منابع مشابه
Mechanical Properties and Eco-Efficiency of Steel Fiber Reinforced Alkali-Activated Slag Concrete
Conventional concrete production that uses ordinary Portland cement (OPC) as a binder seems unsustainable due to its high energy consumption, natural resource exhaustion and huge carbon dioxide (CO₂) emissions. To transform the conventional process of concrete production to a more sustainable process, the replacement of high energy-consumptive PC with new binders such as fly ash and alkali-acti...
متن کاملCoir Fiber Reinforced Polypropylene Composite Panel for Automotive Interior Applications
In this study, physical, mechanical, and flammability properties of coconut fiber reinforced polypropylene (PP) composite panels were evaluated. Four levels of the coir fiber content (40, 50, 60, and 70 % based on the composition by weight) were mixed with the PP powder and a coupling agent, 3 wt % maleic anhydride grafted PP (MAPP) powder. The water resistance and the internal bond strength of...
متن کاملFiber- Reinforced Composite for Orthodontic Anchorage Technique
Introduction: In orthodontic treatment, adequate anchorage is necessary to move the intended teeth. In some cases, just anterior teeth are malaligned, while posterior occlusion is acceptable. Therefore, the posterior teeth could be integrated by fiber-reinforced composite (FRC) to provide a rigid anchorage. This method proved advantageous since brackets are bonded just to anter...
متن کاملEvaluation of load-deflection properties of fiber-reinforced composites and its comparison with stainless steel wires
BACKGROUND The aim of this study was to evaluate the response of common sized fiber-reinforced composites (FRCs) to different deflections due to bending forces and comparing it with stainless steel (SS) wires. MATERIALS AND METHODS In this experimental study, two FRC groups with 0.75 mm and 1.2 mm diameters (Everstick Ortho, Stick Tech, Finland) and three SS groups with 0.016 × 0.022 inch, 0....
متن کاملSelf-Sensing Properties of Alkali Activated Blast Furnace Slag (BFS) Composites Reinforced with Carbon Fibers
In recent years, several researchers have shown the good performance of alkali activated slag cement and concretes. Besides their good mechanical properties and durability, this type of cement is a good alternative to Portland cements if sustainability is considered. Moreover, multifunctional cement composites have been developed in the last decades for their functional applications (self-sensi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Current trends in civil & structural engineering
سال: 2022
ISSN: ['2643-6876']
DOI: https://doi.org/10.33552/ctcse.2022.08.000687