Curing Depth of Light-activated Nanofiller containing Resin Composites
نویسندگان
چکیده
منابع مشابه
Visible-light-activated Resin Composites
The relationships between the transmission coefficient and the cure depth were evaluated on eight commercially available light-activated resin composites. The determination of transmission coefficient was carried out by the use of a radiometer for various shades of the resin composites. The transmission coefficient, ranging from 0.042 to 0.263, wasdependent upon the shade of the resin. There wa...
متن کاملLight curing of resin-based composites in the LED era.
This review thoroughly accumulated information regarding new technologies for state-of-the-art light curing of resin composite materials. Visible light cured resin-based composites allow the dentist to navigate the initiation of the polymerization step for each layer being applied. Curing technology was regularly subjected to changes during the last decades, but meanwhile the LED era is fully e...
متن کاملCuring depth of composite resin light cured by LED and halogen light-curing units
The purpose of this study was to evaluate the polymerization effectiveness of a composite resin (Z-250) utilizing microhardness testing. In total, 80 samples with thicknesses of 2 and 4 mm were made, which were photoactivated by a conventional halogen light-curing unit, and light-curing units based on LED. The samples were stored in water distilled for 24 h at 37 ° C. The Vickers microhardness ...
متن کاملThe cytotoxicity of resin composites cured with three light curing units at different curing distances.
OBJECTIVE The purpose of this study was to compare the effect of light curing distance on the cytotoxicity of five resin composites cured with three high-power light curing units. STUDY DESIGN Seven cylindrical discs of each material (Grandio®, Voco; Filtek™ Z250, 3M ESPE; Clearfil™ AP-X, Kuraray Co. Ltd.; Aelite™ LS, Bisco Inc. and Simile®, Pentron) were cured. For curing, soft-up mode of qu...
متن کاملHardness of composite resin polymerized with different light-curing units
Introduction: The degree of polymerization depends on the type of light-curing unit. The aim of this study was to compare the hardness of composite resin cured by LED and Halogen light curing units. Methods: In this experimental study, 20 cylindrical samples of Tetric Ceram composite were prepared. Half of them were cured with Ultralume 2 LED and the other half with Astralis 7 Halogen light ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: World Journal of Dentistry
سال: 2012
ISSN: 0976-6006,0976-6014
DOI: 10.5005/jp-journals-10015-1141