Cu/Multiwalled Carbon Nanotube Composite Films Fabricated by Pulse-Reverse Electrodeposition
نویسندگان
چکیده
منابع مشابه
Pulse Reverse Electrodeposition of Spherical Ni-MWCNT Composite Skein
Watt’s bath and pulse reverse (PR) electrodeposition is used to produce spherical nickelmultiwall carbon nanotubes (Ni-MWCNT) of 2.00, 0.93, 1.63 and 6.71 μm diameter and a variety ofsize distributions. For 60 cycles, an absolute electrodeposition current of 18 A/dm2 is applied atcurrent ratios of ii = idissolution/ideposition = 0, 0.077, 0.200 and 0.368. A simple exponential equation isfitted ...
متن کاملPolyimide/Carbon Nanotube Composite Films
Low color, space environmentally durable polymeric films with sufficient electrical conductivity to mitigate electrostatic charge (ESC) build-up have potential applications on large, deployable, ultra-light weight Gossamer spacecraft as thin film membranes on antennas, solar sails, thermal/optical coatings, multi-layer insulation blankets, etc.. The challenge has been to develop a method to imp...
متن کاملCHARACTERIZATION OF CO-FE MAGNETIC FILMS FABRICATED BY GALVANO-STATIC ELECTRODEPOSITION
In this research, nanocrystalline Co-Fe coatings were electrodeposited on copper substrate. The influence of current density on different properties of the films at two pH levels was investigated. All the coatings showed nodular structure with rougher morphology at higher current densities. Due to anomalous deposition at higher current density, the amount of iron content increased and reached i...
متن کاملBuckling Analysis of Spherical Composite Panels Reinforced by Carbon Nanotube
In this study, the buckling behavior of moderately thick Carbon Nano-Tube (CNT)-reinforced spherical composite panels subjected to both uniaxial and biaxial loads is examined. The uniform and various kinds of functionally graded distributions of the CNT are considered. The mechanical properties of the nanocomposite panels are estimated using the modified rule of mixture. Based on the first-orde...
متن کاملNanotube Composite Carbon Fibers
The mechanical properties of materials in small rod-shaped form are of considerable technological interest since, due to their shape and size, they can exhibit appreciably greater strength relative to corresponding macroscopic forms. For example, the mechanical strength of silicon carbide whiskers systematically increases with decreasing whisker diameter over the 100 to 1 micron range. This phe...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Electrochemical Society
سال: 2011
ISSN: 0013-4651
DOI: 10.1149/1.3518414