Cu/Co Multilayer Electrodeposition with Dual-Pulsed Current.
نویسندگان
چکیده
منابع مشابه
Pulsed Electrodeposition of Copper
Pulsed electrolysis of copper has been systematically investigated by electrodepositing copper from a copper sulfate bath. Pulse duty cycles of 5 to 80 percent, at frequencies from 10 to 100 Hz with current densities ranging from 2.5 to 7.5 A/dm2 were employed. The appearance of Hull Cell panels with both direct current and pulsed current was recorded. The influence of pulsed current on current...
متن کاملEffect of pulsed current densities on co-electrodeposition of Graphene Oxide/ Calcium-Phosphate coatings and their biocompatibility
In this study, calcium-phosphate (Ca-P) and graphene oxide (GO)/ calcium-phosphate (Ca-P) coatings were electrodeposited with different pulsed current densities on TiO2 nanotubes. Results showed that the co-electrodeposition rate in the presence of GO, especially at low current densities of 2 and 5 mA/cm2, significantly decreased. This might be due to the large size of GO sheets as compared to ...
متن کاملMagnetic Properties of Fe/Cu Multilayers Prepared Using Pulsed-Current Electrodeposition
[Fe (tFe) nm/Cu (tCu) nm]N multilayer films were prepared using pulsed-current electrodeposition method. The role of the pulsed-current deposition and Fe and Cu layer thicknesses on the magnetic properties was investigated. The microstructure of the multilayer films is dependent on the thicknesses of both the Fe and Cu layers. The saturation magnetization of the multilayers strongly correlated ...
متن کاملNanopatterned surfaces based on template-assisted multilayer electrodeposition.
Selective, template-assisted growth of electrodeposited, layered materials leads to the top-down designable realization of nanopatterned surfaces with a large surface area (>1 cm(2)) comprised of multi-dimensional, multiscale (10 nm-1 μm) features, without the need of standard nanolithography. This process opens a manufacturable route to functional nanodevices that rely on anisotropic, nanoscal...
متن کاملZinc-Nickel Binary Alloys Electrodeposition of Steel Using Pulse Current
Zinc-Nickel electrodeposits have been widely adopted for surface treatment of automobile steel sheet for high corrosion resistance. In this work the effect of pulse parameters on the Zn-Ni alloy electrodeposits was investigated. The hardness, thickness, corrosion resistance and composition of deposits thus produced were investigated. The surface topography of the deposits was also observed in S...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Surface Finishing Society of Japan
سال: 1996
ISSN: 0915-1869,1884-3409
DOI: 10.4139/sfj.47.623