Cu-Ni-Based Alloys from Nanopowders as Potent Thermoelectric Materials for High-Power Output Applications

Bismuth Telluride and Its Alloys as Materials for Thermoelectric Generation

Bismuth telluride and its alloys are widely used as materials for thermoelectric refrigeration. They are also the best materials for use in thermoelectric generators when the temperature of the heat source is moderate. The dimensionless figure of merit, ZT, usually rises with temperature, as long as there is only one type of charge carrier. Eventually, though, minority carrier conduction become...

(100) surface segregation in Cu-Ni alloys.

Oxide Based Thermoelectric Materials for Large Scale Power Generation

The thermoelectric (TE) devices are based on the Seebeck and Peltier effects, which describe the conversion between temperature gradient and electricity. The effectiveness of the material performance can be described by its figure of merit, ZT, which is defined as ZT = T , where a is the Seebeck coefficient of the material, a is the electrical conductivity and K is the total thermal conductivit...

Industrial Cu-Ni alloys for HTS coated conductor tape

Copper rich Cu-Ni alloys have been textured with the RABiTS method in order to get non-magnetic and cost efficient substrates for coated conductor wires. The study is focused on two industrial compositions: Cu55Ni45 (Constantan) and Cu70Ni30. Studies on surface roughness have been done. The effects of annealing conditions (temperature and atmosphere) on the grain boundaries deepness were analyz...

Nanostructured thermoelectric skutterudite Co(1-x)Ni(x)Sb3 alloys.

Nanostructured Ni-doped skutterudites Co(1-x)Ni(x)Sb3 (with x ranging from 0.01 to 0.09) were prepared by ball milling and direct-current induced hot press. It was found that the thermal conductivity was reduced due to strong electron-phonon scattering from Ni-doping as well as phonon scattering from the increased grain boundary of the nanostructures. A maximum dimensionless figure-of-merit of ...