Crystallization Kinetics of Melt-Blended Low-Density Phthalic Anhydride with a Low-Tg Tin-Phosphate
نویسندگان
چکیده
منابع مشابه
Grafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملgrafting of acrylamide to low density polyethylene during melt processing
acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. ftir studies revealed that the degree of grafting increased by an increase in acrylamide concentration. maximum grafting was obtained at 7 minute...
متن کاملOxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...
متن کاملCrystallization kinetics of the bulk-glass-forming Pd43Ni10Cu27P20 melt
The crystallization of undercooled Pd43Ni10Cu27P20 melts is studied under isothermal conditions and at constant heating and cooling rates. Investigations are carried out by fluxing the melt with B2O3 and without any fluxing material. The isothermal experiments allow us to determine the complete time–temperature-transformation diagram with a minimum crystallization time of about 200 s for the fl...
متن کاملLarge-Grain Polysilicon Films with Low Intragranular Defect Density by Low- Temperature Solid-Phase Crystallization
Solid phase crystallization (SPC) of a-Si: H at 600 °C was investigated by transmission electron microscopy (TEM) and Raman spectroscopy in a cantilever structure, where the underlying SiO2 was removed prior to the crystallization. The absence of the underlying oxide leads to both a higher grain size and a lower intragranular defect density. The grain size increases from 0.6 μm in regions with ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Open Journal of Polymer Chemistry
سال: 2014
ISSN: 2165-6681,2165-6711
DOI: 10.4236/ojpchem.2014.43005