Crystallite Size and Microstrain Measurement of Cathode Material after Mechanical Milling using Neutron Diffraction Technique
نویسندگان
چکیده
منابع مشابه
Crystallite Size Measurement Using X- Ray Diffraction
Mike Meier University of California, Davis September 13, 2004 Figure 1. FEG-SEM image of nanosized aluminum oxide powder. Note the magnification and the size of the micron bar. Also note how the smaller particles and the edges of the larger particles appear to be somewhat transparent. This is because much of the 5 kV electron beam can pass through these thinner parts of the particles. CRYSTALLI...
متن کاملEffect of milling time on the crystallite size and microstructure of Al2O3/Mo Nano composite
In this paper, the production of Al2O3-Mo nano-composites via mechanical milling was investigated. Molybdenum and alumina powders with certain ratios were grounded in a planetary ball mill at different times. XRD technique was used to determine the crystallite size of the milled powders. The microstructure of milled powders was studied using optical and electron microscopes. The crystallite siz...
متن کاملEVALUATION OFDISLOCATION STRUCTURE AND CRYSTALLITE SIZE IN WORN AL-SI ALLOY BY X-RAY DIFFRACTION
Abstract: powerful method for the characterization of microstructures of crystalline materials in terms of crystallite size anddislocation structures. In this paper the effect of the sliding on the microstructure of A356 in the as-cast and heattreated conditions are studied, The X-ray phase analysis shows that with increasing applied load, the dislocationdensity is increased, whereas the crysta...
متن کاملOperando Lithium Dynamics in the LiRich Layered Oxide Cathode Material via Neutron Diffraction
DOI: 10.1002/aenm.201502143 in battery technology have come since its fi rst demonstration, the high energy demands needed to electrify the automotive industry have not yet been met with the current technology. [ 2,3 ] One considerable bottleneck is the cathode energy density. [ 2,3 ] The lithium layered oxides utilize transition metal redox pairs for charge/ discharge compensation during lithi...
متن کاملSynthesis and Statistical Analysis of Changing Size of Nano-structured PbO2 during Mechanical Milling Using Taguchi Methodology
The research investigates synthesized Nano-structured PbO2 using ball milling. The structure and morphology of the samples were determined in the process of milling by means of XRD and SEM. The size of particles was estimated through DLS analysis. The TEM image of the synthesized powder verifies the achievement of Nano dimensions. Design and analyses of the results using Taguchi methodology rev...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Atom Indonesia
سال: 2011
ISSN: 2356-5322,0126-1568
DOI: 10.17146/aij.2010.27