Crystalline TiO2 supported on stainless steel mesh deposited in a one step process via pulsed DC magnetron sputtering for wastewater treatment applications

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pulsed DC bias effects on p-type semiconductor SrCu2O2 film deposited by RF magnetron sputtering.

Transparent p-type semiconducting SrCu2O2 films have been deposited by RF magnetron sputtering under unbalanced bipolar pulsed DC bias on low-alkali glass substrates in a mixed gas of 1% H2/Ar below 400 degrees C. The pulsed DC bias voltages to substrate were varied from 0 V to -200 V with a frequency of 350 kHz. The effect of pulsed DC bias on the structure and electrical and optical propertie...

متن کامل

CrNx Films Prepared by DC Magnetron Sputtering and High-Power Pulsed Magnetron Sputtering: A Comparative Study

CrNx (0 ≤ x ≤ 0.91) films synthesized using highpower pulsed magnetron sputtering, also known as high-power impulse magnetron sputtering (HiPIMS), have been compared with those made by conventional direct-current (dc) magnetron sputtering (DCMS) operated at the same average power. The HiPIMS deposition rate relative to the DCMS rate was found to decrease linearly with increasing emission streng...

متن کامل

Biocompatibility and Surface Properties of TiO2 Thin Films Deposited by DC Magnetron Sputtering

We present the study of the biocompatibility and surface properties of titanium dioxide (TiO₂) thin films deposited by direct current magnetron sputtering. These films are deposited on a quartz substrate at room temperature and annealed with different temperatures (100, 300, 500, 800 and 1100 °C). The biocompatibility of the TiO₂ thin films is analyzed using primary cultures of dorsal root gang...

متن کامل

Pulsed DC Power Supplies for Dual Magnetron Sputtering

Key features of this waveform are the voltage boost period following each polarity transition and fast current rise time due to that boost. Ideally, the boost voltage would be adjustable. It is expected that adjusting the boost voltage will enable some tuning of the film properties, since it will effectively allow tuning of ion energy within the process. Additionally, adjustable duty, the ratio...

متن کامل

Optical constants of crystalline WO3 deposited by magnetron sputtering

constants of crystalline WO 3 deposited by magnetron sputtering" (1999). Crystalline WO 3Ϫx is an infrared ͑IR͒ electrochromic material having possible applications in satellite thermal control and IR switches. Optical constants of electrochromic materials change upon ion intercalation, usually with H ϩ or Li ϩ. Of primary concern for device design are the optical constants in both the intercalat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Materials Research and Technology

سال: 2020

ISSN: 2238-7854

DOI: 10.1016/j.jmrt.2020.03.101