Crystal-plasticity finite-element simulation of time-dependent springback in a commercially-pure titanium sheet
نویسندگان
چکیده
منابع مشابه
Enhanced superplasticity in commercially pure titanium alloy
The superplasticity of commercially pure titanium alloy at high temperature was studied and the dynamic recrystallization phenomenon of the alloy was investigated by using electron back scattered diffraction. A two-step deformation method was used to increase the ductility of the alloy from 188% to 243%. 2004 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
متن کاملDental implant materials: commercially pure titanium and titanium alloys.
Manufacturers use six different titanium-based biomaterials to fabricate dental implants. Each of these materials, including four grades of commercially pure titanium and two titanium alloys, has distinct mechanical and physical properties. Clinicians should recognize these differences for optimal treatment planning and patient care.
متن کاملFinite element analysis of geometrically necessary dislocations in crystal plasticity
We present a finite element method for the analysis of ductile crystals whose energy depends on the density of geometrically necessary dislocations (GNDs). We specifically focus on models in which the energy of the GNDs is assumed to be proportional to the total variation of the slip strains. In particular, the GND energy is homogeneous of degree one in the slip strains. Such models indeed aris...
متن کاملThe effect of crystal orientation on the indentation response of commercially pure titanium: experiments and simulations
This study combines nanoindentation, electron backscatter diffraction (EBSD) and crystal plasticity finite element analysis to examine the anisotropy in the indentation behaviour of individual grains within an α-Ti polycrystal. Nanoindentation is utilized to mechanically probe small volumes of material within grains for which orientations are known from prior EBSD mapping. Both indentation modu...
متن کاملINVESTIGATION ON THE EFFECTS OF MAGNETIC FIELD ON BROMIDE-INDUCED PITTING OF COMMERCIALLY PURE TITANIUM
Abstract: In chloride salt solutions, titanium alloys exhibit reasonably high pitting potentials as high as +10 V (vs. Ag/AgCl) at room temperatures. On the other hand, anodic pitting potentials are significantly lower in bromide solutions. In this study, pitting corrosion of commercially pure titanium in aqueous NaBr solution of 0.1 M concentration at room temperature was studied and the e...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Physics: Conference Series
سال: 2018
ISSN: 1742-6588,1742-6596
DOI: 10.1088/1742-6596/1063/1/012122