Cross Tension Prestressed Concrete Pavements Temperature Stresses
نویسندگان
چکیده
منابع مشابه
Prestressed Concrete Piles
A state of the art presentation on prestressed piling as used throughout the world is discussed in this General Report to the FIP Symposium on Mass-Produced Prestressed Precast Elements in Madrid, Spain, May 1968. Historical information, design data and notes along with manufacturing techniques, installation practices, discussion of problems and failures and a complete bibliography are all cove...
متن کاملEffects of Temperature Variations on Precast, Prestressed Concrete Bridge Girders
The monitoring of a precast, prestressed girder bridge during fabrication and service provided the opportunity to observe temperature variations and to evaluate the accuracy of calculated strains and cambers. The use of high curing temperatures during fabrication affects the level of prestress because the strand length is fixed during the heating, the coefficients of thermal expansion of steel ...
متن کاملDuctility of Prestressed and Partially Prestressed Concrete Beam Sections
D analyses of structures responding elastically to ground motions recorded during severe earthquakes have shown that the theoretical response inertia loads are generally significantly greater than the static design lateral loads recommended by codes. Hence, structures designed for the lateral earthquake loads recommended by codes can only survive severe earthquakes if they have sufficient ducti...
متن کاملJoint Deterioration in Concrete Pavements
Concrete pavements located in cold climates have been experiencing premature joint deterioration. Entrapment of moisture in the joints saturates the surrounding concrete, rendering it susceptible to freeze–thaw damage. To identify and to isolate the variables that might be causing this localized deterioration, concrete cores were obtained from deteriorated and non-deteriorated sections of US 35...
متن کاملFRP Dowels for Concrete Pavements
A Paper for the World Wise Conference 1999 Winnipeg, Manitoba © November 15, 1999 Introduction Joints are used in concrete pavements in order to control cracking due to thermal and environmental conditions. Dowels span joints to transfer load from one slab to an adjacent slab and to provide vertical and horizontal alignment. Currently, smooth epoxy coated steel dowels are placed across transver...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: DEStech Transactions on Engineering and Technology Research
سال: 2017
ISSN: 2475-885X
DOI: 10.12783/dtetr/ictim2016/5588