Cross-Talk Noise Reduction Technique by Shifted-Stacked Pair-Lines Structure
نویسندگان
چکیده
منابع مشابه
A Phase Noise Reduction Technique in LC Cross-coupled Oscillators with Adjusting Transistors Operating Regions
In this paper, an intuitive analysis of a phase noise reduction technique is done, and then a modified structure is proposed to achieve higher phase noise reduction than the original one. This method reduces the impact of noise sources on the phase noise by decreasing closed-loop gain in zero-crossings points and moving this high closed-loop gain to the non-zero-crossings points. This reduction...
متن کاملStacked competitive networks for noise reduction in low-dose CT
Since absorption of X-ray radiation has the possibility of inducing cancerous, genetic and other diseases to patients, researches usually attempt to reduce the radiation dose. However, reduction of the radiation dose associated with CT scans will unavoidably increase the severity of noise and artifacts, which can seriously affect diagnostic confidence. Due to the outstanding performance of deep...
متن کاملFuzzy ARTMAP Technique for Speech Noise Reduction
This paper presents an approach to reduction noise of speech voice commanded automatic wheel chair using a technique based on the fuzzy ARTMAP neural network (FAMNN). The measurable output noisy speech with 5dB, 1dB, -1dB, -5dB and -10dB SNR level is obtained as the contaminated signal of the interference to compare with the output data of the filter. The white noise source is acquired as the i...
متن کاملNoise reduction using hybrid noise estimation technique and post-filtering
In this paper, a novel noise reduction method using hybrid noise estimation technique and post-filtering is proposed to suppress both localized and non-localized noise components which can not be dealt with by the traditional methods [2][3][4]. To do this, a hybrid noise estimation approach is proposed by combining our previously constructed multichannel noise estimation approach and a single-c...
متن کاملStacked Patch Antenna With Cross Slot Electronic Band Gap Structure
A cross slotted electronic band gap (EBG) with stacked rectangular patches shorted with a shorting pin is proposed in this paper. The study is being done on how the various parameters are varied by changing the probe feed location. The design is constructed by using stacking of patches, shorting pin and cross slotted EBG to form an optimized antenna design with antenna efficiency of approximate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Electronics Packaging
سال: 2004
ISSN: 1343-9677,1884-121X
DOI: 10.5104/jiep.7.548