Crevice Corrosion Study on Alloy 22 by Electrochemical Noise Technique

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Electrochemical Noise Analysis of Anaerobic (Bacterial) Corrosion of Steel

Corrosion of structural steel in an SRB containing environment for as long as 9 months, is studied using the Electrochemical Noise Analysis technique. The results show that the activity of the system, which was very low initially, started to increase after 6 months exposure to the environment. The power spectral density curves of the Electrochemical Potential Noise of the system, using the maxi...

متن کامل

Mitigation of Corrosion on Magnesium Alloy by Predesigned Surface Corrosion

Rapid corrosion of magnesium alloys is undesirable in structural and biomedical applications and a general way to control corrosion is to form a surface barrier layer isolating the bulk materials from the external environment. Herein, based on the insights gained from the anticorrosion behavior of corrosion products, a special way to mitigate aqueous corrosion is described. The concept is based...

متن کامل

Effect of Alloying Elements on Crevice Corrosion Inhibition of Nickel- Chromium-Molybdenum-Tungsten Alloys under Aggressive Conditions: An Electrochemical Study

The effects of Cr, Mo and W on the crevice corrosion of a number of commercial Ni-Cr-Mo (W) alloys in 1.0 mol/L NaCl were studied using the potentiodynamic-galvanostaticpotentiodynamic technique to measure film breakdown and repassivation potentials as well as protection temperatures. As expected, Cr is the key element determining resistance to crevice initiation but a substantial Mo alloy cont...

متن کامل

Combining Rigorously Controlled Crevice Geometry and Computational Modeling for Study of Crevice Corrosion Scaling Factors

Microfabrication methods have been used to construct crevice formers of rigorously controlled gap and length. These have been used to study the IR-controlled crevice corrosion of Ni200 in 0.5 M H2SO4 to determine the effect of crevice gap ~G! on the position of the accelerated attack (xcrit) within the crevice. The experimental results were then compared to the results of computational studies....

متن کامل

Effect of heat treatment on corrosion and electrochemical behaviour of AZ91D magnesium alloy

An AZ91D ingot in the as-cast condition was homogenized by solution treatment and then aged for various periods of time. The microstructures produced were studied in detail and the b phase volume fraction was measured quantitatively. The Corrosion resistance of all the different microstructures was studied in 3.5% NaCl solution through weight loss measurement in constant immersion conditions an...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Procedia Materials Science

سال: 2012

ISSN: 2211-8128

DOI: 10.1016/j.mspro.2012.06.030