Creep strength of a binary Al62Ti38 alloy
نویسندگان
چکیده
منابع مشابه
Transformation-Induced Creep and Creep Recovery of Shape Memory Alloy
If the shape memory alloy is subjected to the subloop loading under the stress-controlled condition, creep and creep recovery can appear based on the martensitic transformation. In the design of shape memory alloy elements, these deformation properties are important since the deflection of shape memory alloy elements can change under constant stress. The conditions for the progress of the marte...
متن کاملMicrostructure Stability and Creep Strength in a Die-Cast AX52 Magnesium Alloy
Superior creep strength of a heat resistant AX52 magnesium alloy is ascribed to the grain boundary eutectic Al2Ca phase covering the primary -Mg grains. The eutectic phase is stable in morphology at temperatures below 473K, while it collapses during long term exposure at temperatures higher than 473K. The microstructural change of the alloy during high temperature exposure is characterized by t...
متن کاملPrecipitate Redistribution During Creep of Alloy 617
Nickel-based superalloys are being considered for applications within advanced nuclear power generation systems due to their high temperature strength and corrosion resistance. Alloy 617, a candidate for use in heat exchangers, derives its strength from both solid solution strengthening and the precipitation of carbide particles. However, during creep, carbides that are supposed to retard grain...
متن کاملA New Creep Constitutive Model for Eutectic Solder Alloy
In this study, a large number of creep tests were carried out to study the effect of stress level and testing temperature on the creep behavior of 63 Sn/37Pb solder in a systematic manner. Based on the dislocation controlled creep mechanism and Gibbs’ free-energy theory, a new creep constitutive model was proposed. The model was found to describe accurately the creep flow of the solder and to b...
متن کاملcreep and creep-rupture characteristics of lead and sn70%-30% lead alloy
materials exhibit significant creep behavior at temperatures above 40% of their absolute melt temperature. lead, tin and their alloys are such materials which experience significant creep behavior in room temperature. one of the most important applications of the tin-lead alloys is soldering electronic circuits in electronic industry, and for lead are isolation walls and wet batteries. room tem...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Materials Research
سال: 2010
ISSN: 2195-8556,1862-5282
DOI: 10.3139/146.110321