Creep rupture properties of Ti-8Al-1Mo-1V alloy
نویسندگان
چکیده
منابع مشابه
Quantitative Analysis of Weld Pore Size and Depth and Effect on Fatigue Life of Ti-6Al-2Zr-1Mo-1V Alloy Weldments
Titanium-alloy weldments have been extensively used in engineering structures, and accurate estimation of the fatigue life is beneficial for avoiding catastrophic failures in titanium-alloy structures. The weld pore is a common defect in these weldments that significantly influences the fatigue process. In this study, the weld-pore size and depth and its effect on the fatigue life of Ti-6Al-2Zr...
متن کاملcreep and creep-rupture characteristics of lead and sn70%-30% lead alloy
materials exhibit significant creep behavior at temperatures above 40% of their absolute melt temperature. lead, tin and their alloys are such materials which experience significant creep behavior in room temperature. one of the most important applications of the tin-lead alloys is soldering electronic circuits in electronic industry, and for lead are isolation walls and wet batteries. room tem...
متن کاملMicrostructure and Mechanical Properties of Large-Scale Ingots of the Zr-1Mo Alloy
A large-scale ingot of Zr-1Mo alloy was produced for industrial manufacturing to investigate whether it is possible to produce an ingot with homogeneity. The homogeneous ingot with a chemical composition of Zr-1mass%Mo was prepared successfully. The microstructure, mechanical properties, and magnetic susceptibility were evaluated. The microstructure showed a coarse colony structure of a plate-l...
متن کاملMicrostructure, Tensile and Creep Properties of Ta20Nb20Hf20Zr20Ti20 High Entropy Alloy
This paper examines the microstructure and mechanical properties of Ta20Nb20Hf20Zr20Ti20. Two casting processes, namely, gravity casting and suction-assisted casting, were applied, both followed by Hot Isostatic Pressing (HIP). The aim of the current study was to investigate the creep and tensile properties of the material, since the literature review revealed no data whatsoever regarding these...
متن کاملFatigue properties of Ni-43.5%Ti superelastic alloy castings.
To evaluate a Ni-43.5wt%Ti alloy as a new alloy for cast clasp, the fatigue properties of its castings were examined and compared with those of Co-Cr and Type IV Au alloys castings. The Ni-Ti alloy was cast into a phosphate-bonded investment mold using an argon-arc melting and pressure casting machine. The Ni-Ti alloy castings showed superelasticity in bending tests. Fatigue tests were carried ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Research of the National Bureau of Standards, Section C: Engineering and Instrumentation
سال: 1968
ISSN: 0022-4316
DOI: 10.6028/jres.072c.012