Creep Fracture Modes at High Temperature in SUS321H
نویسندگان
چکیده
منابع مشابه
Temperature Effect on Creep and Fracture Behaviors of Nano-SiO2-composite and AlSi12Cu3Ni2MgFe Aluminum Alloy
In the presented article, the temperature effect was studied on creep properties and fracture behaviors of AlSi12Cu3Ni2MgFe aluminum-silicon alloys, unreinforced and reinforced with SiO2 nano-particles. For such objective, standard specimens were fabricated by gravity casting and stir-casting methods, for aluminum alloys and nano-composites, respectively. Then, force-controlled creep...
متن کاملCreep Parameters of Spruce Wood in High Temperature Environment
The paper presents partial results of an ongoing project dealing with thermal diffusion and mechanical behavior of spruce wood in high temperature environment (up to 180°C). The objective of this part of study was to obtain rheological properties of spruce wood which will be used in future modeling of wood performance in high temperatures. Oven dry samples (30 x 30 x 700 mm) underwent constant ...
متن کاملThe Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment
There is an increasing need to assess the service life of components containing defect which operate at high temperature. This paper describes the current fracture mechanics concepts that are employed to predict cracking of engineering materials at high temperatures under static and cyclic loading. The relationship between these concepts and those of high temperature life assessment methods is ...
متن کاملCollective Modes in High-Temperature Superconductors
The role of collective modes in various experiments on the cuprates is investigated. We calculate the neutron scattering, photoemission (ARPES), and Raman scattering intensities below Tc within the fluctuation-exchange (FLEX) approximation for the two-dimensional Hubbard model. It is shown that the large peak in the dynamical spin susceptibility arises from a weakly damped spin-density-wave col...
متن کاملCreep Fracture in Tempered Martensitic Steels
Creep strength enhanced ferritic (CSEF) steels which contain 9 to 12%Cr have become the steels of choice in many industrial high energy systems. The typical compositions of alloy types P91, P92 and E911 are compared with 12CrMoV in Table 1. These steels are selected for use in applications where high temperature creep can occur because of a favorable balance between cost and properties [1,2]. T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Tetsu-to-Hagane
سال: 1992
ISSN: 0021-1575,1883-2954
DOI: 10.2355/tetsutohagane1955.78.6_934