Creep Deformation of Short Alumina Fiber-Reinforced Al and 6061 Alloy
نویسندگان
چکیده
منابع مشابه
Creep of experimental short fiber-reinforced composite resin.
The purpose of this study was to investigate the reinforcing effect of short E-glass fiber fillers oriented in different directions on composite resin under static and dynamic loading. Experimental short fiber-reinforced composite resin (FC) was prepared by mixing 22.5 wt% of short E-glass fibers, 22.5 wt% of resin, and 55 wt% of silane-treated silica fillers. Three groups of specimens (n=5) we...
متن کاملCreep Behavior of Basalt and Glass Fiber Reinforced Epoxy Composites
The creep behavior of basalt fiber reinforced epoxy (BFRE) and glass fiber reinforced epoxy (GFRE) composites was studied through tensile testing at high temperature. To study the effect of reinforcing epoxy, the micro glass powder (MGP) was added at various volume percentage into the epoxy resin in BFRE composites. The initial strain for all the specimens were evaluated and compared with each ...
متن کاملHigh Temperature Properties of AZ91D Magnesium Alloy Composite Reinforced with Short Alumina Fiber and Mg_{2}Si Particle
Short alumina fiberand in situ Mg2Si particle reinforced magnesium alloy composites were fabricated by squeeze casting. The in situ Mg2Si particles were formed during the infiltration with the melt into the preforms consisting of the fibers having Si particles attached to their surfaces. The microstructure of the composites and their tensile strength and Young’s modulus in the range from 293K t...
متن کاملSynthesis of Nano Alumina Reinforced Magnesium-Alloy Composites
The main aim of this paper was to determine the amount of Al2O3 reinforcement that results into best combination of strength. Magnesium nano composites containing 3.5, 7.0 and 14 volume percentage of Al2O3 were synthesized through powder metallurgy route. Resistance of furnace sintering technique (heating rate: 49°C/min).Micro structural characterization revealed reasonably uniform distribution...
متن کاملMicrostructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites
Metallic glass-reinforced metal matrix composites are an emerging class of composite materials. The metallic nature and the high mechanical strength of the reinforcing phase offers unique possibilities for improving the engineering performance of composites. Understanding the structure at the amorphous/crystalline interfaces and the deformation behavior of these composites is of vital importanc...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Transactions, JIM
سال: 1995
ISSN: 0916-1821,2432-471X
DOI: 10.2320/matertrans1989.36.1406