Creep crack growth behavior in 21/4 Cr-Mo steel.
نویسندگان
چکیده
منابع مشابه
The Fracture Mechanics Concept of Creep and Creep/Fatigue Crack Growth in Life Assessment
There is an increasing need to assess the service life of components containing defect which operate at high temperature. This paper describes the current fracture mechanics concepts that are employed to predict cracking of engineering materials at high temperatures under static and cyclic loading. The relationship between these concepts and those of high temperature life assessment methods is ...
متن کاملThe development of creep damage constitutive equations for low Cr-Mo alloy steel and its weldment at low stress
The ultimate objective of this research project is to develop creep damage constitutive equations for low Cr-Mo alloy and its weldment under low stress (0.2-0.4 yield stress, ��). This paper summarizes a critical analysis on the cavity nucleation and growth and the deformation mechanisms and creep damage evolution characteristics at low stress with temperature ranging from 450 °C to 650 °C, in ...
متن کاملFracture and Fatigue-Crack Growth Behavior in Mo-12Si-8.5B Intermetallics at Ambient and Elevated Temperatures
perhaps the most progress has been made with alloys based on nickel and especially titanium aluminides. These alloys can Boron-containing molybdenum silicides have received some exhibit significant room temperature ductility, at least compared interest of late due to their superior low-temperature "pest" to other intermetallics, but have the major disadvantage that their resistance and comparab...
متن کاملStudy of cavities in a creep crack growth test specimen
During their operation, modern aircraft engine components are subjected to increasingly demanding operating conditions, especially the high pressure turbine (HPT) blades. Such conditions cause these parts to undergo different types of time-dependent degradation, one of which is creep. A model using the finite element method (FEM) was developed, in order to be able to predict the creep behaviour...
متن کاملCreep-assisted slow crack growth in bio-inspired dental multilayers.
Ceramic crown structures under occlusal contact are often idealized as flat multilayered structures that are deformed under Hertzian contact loading. Previous models treated each layer as linear elastic materials and resulted in differences between the measured and predicted critical loads. This paper examines the combined effects of creep (in the adhesive and substrate layers) and creep-assist...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1986
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.35.254