منابع مشابه
Advances of two-stage riser catalytic cracking of heavy oil for maximizing propylene yield (TMP) process
Two-stage riser catalytic cracking of heavy oil for maximizing propylene yield (TMP) process proposed by State Key Laboratory of Heavy oil Processing, China University of Petroleum, can remarkably enhance the propylene yield and minimize the dry gas and coke yields, and obtain high-quality light oils (gasoline and diesel). It has been commercialized since 2006. Up to now, three TMP commercial u...
متن کاملSimulation of heavy-oil thermal cracking process on the basis of carbon number-based component approach
Abstract Simulation of heavy oil thermal cracking process is very important but few researches have been published now. In this paper, a simulation framework based on the carbon number-based approach(CNCA) has been established. A systematic division rule is put forward for dividing cracked products into 59 carbon number components. Then the cracking reaction network has been structured and the ...
متن کاملKinetics of Palm Oil Cracking in Batch Reactor
The kinetics of palm oil catalytic cracking over aluminum containing mesoporous silica Al-MCM-41 (5% Al) was investigated in a batch autoclave reactor at the temperatures range of 573 – 673 K. The catalyst was prepared by using sol-gel technique and has been characterized by nitrogen adsorption and x-ray diffraction methods. Surface area of 1276 m/g with average pore diameter of 2.54 nm and por...
متن کاملProduction of Light Olefins through Gas Oil Cracking
Light olefins such as ethylene, propylene, and butylenes, are basic building blocks for petrochemicals. Further, these olefins are also useful for production of clean fuels such as alkylates – which have high octanes but no sulfur, olefins, and aromatics – or as octaneenhancers such as ethers. The conventional olefin production process is steam cracking of C2−C4 light paraffins from natural gas...
متن کاملSulfur distribution in the oil fractions obtained by thermal cracking of Jordanian El-Lajjun oil Shale
The extracted shale oil by the thermal cracking process of the El-Lujjan oil shale showed that the yield of oil was around 12 wt%. The amount of sulfur in this shale oil was found to increase (from 7 to 9.5 wt%) with the increase of the boiling point for different distillate fractions. Sulfur in Jordanian oil shale was found to be mainly organic sulfur with negligible amounts of inorganic sulfu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Fuel Society of Japan
سال: 1973
ISSN: 0369-3775,2185-226X
DOI: 10.3775/jie.52.12