Cracking Parameter PH Considering Weld Heat Input and Restraint Intensity
نویسندگان
چکیده
منابع مشابه
Effects of weld preheat temperature and heat input on type IV failure
Type IV cracking refers to the premature failure of a welded joint due to an enhanced rate of creep void formation in the fine grained or intercritically annealed heat affected zone. A great deal of research effort has been directed at understanding the underlying mechanisms for this type of failure, but most have approached the problem from a metallurgical standpoint, and comparatively little ...
متن کاملInvestigation on Effect of Heat Input on the Microstructure and Mechanical Properties of Hadfield Steel Weld Joints in SMAW Process
In this investigation, the effect of heat input of SMAW process on the microstructure and mechanical properties of Hadfield steel weld joints was investigated. For this purpose, 4 annealed sheets with thickness 2 mm prepared from Hadfield steel and then welding applied by SMAW process with 6.75 and 11.25 kJ/mm heat input values. The evaluation of the microstructures of welding joints was condu...
متن کاملParameter identifiability for heat conduction with a boundary input
The identifiability (i.e. the unique identification) of conductivity in a heat conduction process is considered in the class of piecewise constant conductivities. The 1-D process may have nonzero boundary inputs as well as distributed inputs. Its measurements are collected at finitely many observation points. They are processed to obtain the first eigenvalue and a constant multiple of the first...
متن کاملWeld Magnification Factor Approach in Cruciform Joints Considering Post Welding Cooling Medium and Weld Size
The objective of this research is to develop an experimental-theoretical analysis about the influence of the cooling medium and the geometry of the welding bead profile in fatigue life and the associated parameters with structural integrity of welded joints. A welded joint with cruciform geometry is considered using SMAW (Shielded Metal ArcWelding), plates in structural steel ASTM A36 HR of 8 m...
متن کاملEffect of Heat Input on the Weld Metal Toughness of Chromium-Molybdenum Steel
An attempt has been made to determine the strength and impact properties of Cr-Mo steel weld and base materials by varying the current during manual metal arc welding. Toughness over a temperature range from -32 to 100°C of base, heat affected zone (HAZ) and weld zones at three current settings are made. It is observed that the deterioration in notch toughness at any zone with the temperature d...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1981
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.50.478