Cracking of Residual Oil by Use of Dual Spouted Bed Reactor with Three Chambers (Part 2)

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sustainable hydrogen production via reforming of bio-oil model compounds using a novel spouted bed reactor

Hydrogen produced from renewable energy sources can present significant environmental benefits as an alternative to fossil fuels or as a means for clean power generation via fuel cells. The aqueous fraction of bio oil can be used as a source for hydrogen production, if reformed in the presence of active catalytic materials. Recently, we introduced the concept of the spouted bed reactor for the ...

متن کامل

‏‎suppression of coke formation in thermal cracking by coke inhibitors‎‏

‏‎the main purpose of this research was to:1.develop a coking model for thermal cracking of naphtha.2.study coke inhibition methods using different coke inhibitors.developing a coking model in naphtha cracking reactors requires a suitable model of the thermal cracking reactor based on a reliable kinetic model.to obtain reliable results all these models shall be solved simultaneously.for this pu...

15 صفحه اول

A Pilot Study of Syngas Production from Bio-oil Thermal Cracking in a Bubbling Fluidized Bed Reactor

A fluidized bed reactor that is operating in the bubbling regime has been developed for the conversion of bio-oils to syngas.The reactor consists of a 7.6 cm I.D. (or internal diameter) bed, with an expanded freeboard. The volume of the reactor can be adjusted to vary the gas residence time. This reactor has been used to carry out either thermal or catalytic cracking for reforming bio-oils.A ga...

متن کامل

Kinetics of Palm Oil Cracking in Batch Reactor

The kinetics of palm oil catalytic cracking over aluminum containing mesoporous silica Al-MCM-41 (5% Al) was investigated in a batch autoclave reactor at the temperatures range of 573 – 673 K. The catalyst was prepared by using sol-gel technique and has been characterized by nitrogen adsorption and x-ray diffraction methods. Surface area of 1276 m/g with average pore diameter of 2.54 nm and por...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of The Japan Petroleum Institute

سال: 1977

ISSN: 0582-4664

DOI: 10.1627/jpi1958.20.415