Cracking Behavior of RC Tension Members Reinforced with Amorphous Steel Fibers

Strength and Toughness of Reinforced Concrete with Coated Steel Fibers

The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....

Mechanical Behavior of Self-Compacting Reinforced Concrete Including Synthetics and Steel Fibers

This paper investigated the effects of combining fibers with self-consolidating concrete (SCC). 12 series of test specimens were prepared using three kinds of fibers including steel, polyphenylene sulfide (PPS) and glass fibers with four different volumes fractions and one specimen without fibers as a reference sample. All plans were subjected to fresh concrete tests. For mechanical behavior of...

Compressive Behavior of Fiber-Reinforced Concrete with End-Hooked Steel Fibers

In this paper, the compressive behavior of fiber-reinforced concrete with end-hooked steel fibers has been investigated through a uniaxial compression test in which the variables were concrete compressive strength, fiber volumetric ratio, and fiber aspect ratio (length to diameter). In order to minimize the effect of specimen size on fiber distribution, 48 cylinder specimens 150 mm in diameter ...

Behavior of Concrete Beams Reinforced Steel Plates

Behavior of Concrete Beams Reinforced Steel Plates