Crack monitoring using short-gauged Brillouin fiber optic sensor
نویسندگان
چکیده
Detection and quantification of cracks for various civil infrastructures on a large scale are difficult both technologically economically through current sensing methodologies. This study presents novel fiber-optic sensor named short-gauged Brillouin fiber optic sensor, which enables basic Brillouin-based analyzers to achieve early crack detection accurate width measurement. The concept design the proposed firstly introduced, followed by respective instrumentation procedures. On this basis, theoretical deduction numerical simulations crack-induced gain spectrum (BGS) response using carried out, verified subsequently controlled laboratory tests. measured BGS responses then leveraged quantification. A peak-fitting-based methodology was adopted analyze data may facilitate economical long-distance distributed as generic technique.
منابع مشابه
Fiber-Optic Thermal Sensor for TiN Film Crack Monitoring
The study focuses on the thermal and temperature sensitivity behavior of an optical fiber sensor device. In this article, a titanium nitride (TiN)-coated fiber Bragg grating (FBG) sensor fabricated using an ion beam sputtering system was investigated. The reflection spectra of the FBG sensor were tested using R-soft optical software to simulate the refractive index sensitivity. In these experim...
متن کاملOverview of Recent Bridge Monitoring Applications using Distributed Brillouin Fiber Optic Sensors
Brillouin fi ber optic sensor technology is a promising technology for structural health monitoring (SHM) thanks to its unique feature of distributed strain and temperature measurement by means of low-cost optical fi bers. Amortization of relatively expensive data acquisition systems can be facilitated by the discontinuous monitoring of multiple structures. However, the lack of specifi cally de...
متن کاملDetection of Ceramic Cracks Using a Distributed High-Resolution Brillouin Fiber Optic Sensor
A distributed sensor system is highly desirable for detecting, locating, and monitoring fine cracks at unknown locations in advanced ceramics. This paper presents a distributed high-resolution fiber optic sensor based on the Brillouin scattering principle, and its application in ceramic crack detection for the first time. The existence of cracks, together with their locations, is identified by ...
متن کاملA fiber optic sensor for measuring glucose in aqueous solutions
In this paper, the set-up of a multi-mode fiber optic sensor for measuring glucose in aqueous solutions is investigated and evaluated. The basis of this sensor is based on the Fresnel Reflection. In this setup, a helium-neon laser is used as a light source, a fiber optic probe, photocell as detector and a digital multimeter. The statistical analysis of the recorded data shows a highly linear be...
متن کاملSensitivity Enhancement of Fiber Optic Diesel Adulteration Detection Sensor Using Stripped Clad SBend Section
A novel geometry for enhancing the sensitivity of intensity modulated refractometric fiber optic sensor for detection of adulteration level in diesel by kerosene is proposed. In this multimode plastic optical fiber is uncladded for specific length and bent into S shape. This geometry is simulated and analyzed using Beam Propagation Method in Beam prop RSOFT software. When sensor is immersed in ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement
سال: 2021
ISSN: ['1873-412X', '0263-2241']
DOI: https://doi.org/10.1016/j.measurement.2021.109461